[PATCH] ARM: dts: bcm2711-rpi-4-b: Use aliases to set custom MMC device index

[Peter Robinson]

On Wed, Jun 8, 2022 at 1:35 PM Ariel D'Alessandro
<ariel.dalessandro at collabora.com> wrote:
>
> Add MMC aliases to ensure that the /dev/mmcblk ID for SD card won't
> change depending on the probe order of the MMC drivers.

Is  the bcm2711-rpi.dtsi a better place for it given there's other
aliases there and it will be consistent across variations?

> Signed-off-by: Ariel D'Alessandro <ariel.dalessandro at collabora.com>
> ---
>  arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 4 ++++
>  1 file changed, 4 insertions(+)
>
> diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
> index 4432412044de..780812542bad 100644
> --- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
> +++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
> @@ -14,6 +14,10 @@ chosen {
>                 stdout-path = "serial1:115200n8";
>         };
>
> +       aliases {
> +               mmc0 = &emmc2;  /* mmcblk0 for SD */
> +       };
> +
>         leds {
>                 led-act {
>                         gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
> --
> 2.34.1
>
>
> _______________________________________________
> linux-rpi-kernel mailing list
> linux-rpi-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-rpi-kernel