[PATCH] arm64: dts: rockchip: Fix SoQuartz CM4IO usb

Peter Geis pgwipeout at gmail.com
Fri Jun 10 07:44:23 PDT 2022


On Fri, Jun 10, 2022 at 9:26 AM Peter Geis <pgwipeout at gmail.com> wrote:
>
> The SoQuartz CM4-IO should support otg mode, however it currently
> defaults to device mode when otg is enabled. Force it to host mode to
> retain the previous behavior.

It would seem the role-switch issue is more widespread than originally
thought, affecting other boards where automatic control should work.
Please hold this patch while I investigate further.

Thanks!

>
> Fixes: bc405bb3eeee ("arm64: dts: rockchip: enable otg/drd operation of usb_host0_xhci in rk356x")
>
> Signed-off-by: Peter Geis <pgwipeout at gmail.com>
> ---
>  arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts | 1 +
>  1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts b/arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts
> index e00568a6be5c..56764fae9f9d 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts
> @@ -169,6 +169,7 @@ &usb2phy0_otg {
>  };
>
>  &usb_host0_xhci {
> +       dr_mode = "host";
>         status = "okay";
>  };
>
> --
> 2.25.1
>



More information about the linux-arm-kernel mailing list