[PATCH] dt-bindings: display: arm,malidp: remove bogus RQOS property

Liviu Dudau Liviu.Dudau at arm.com
Fri Jun 10 04:53:11 PDT 2022


On Thu, Jun 09, 2022 at 05:27:29PM +0100, Andre Przywara wrote:
> As Liviu pointed out, the arm,malidp-arqos-high-level property
> mentioned in the original .txt binding was a mistake, and
> arm,malidp-arqos-value needs to take its place.
> 
> The binding commit ce6eb0253cba ("dt/bindings: display: Add optional
> property node define for Mali DP500") mentions the right name in the
> commit message, but has the wrong name in the diff.
> Commit d298e6a27a81 ("drm/arm/mali-dp: Add display QoS interface
> configuration for Mali DP500") uses the property in the driver, but uses
> the shorter name.
> 
> Remove the wrong property from the binding, and use the proper name in
> the example. The actual property was already documented properly.
> 
> Fixes: 2c8b082a3ab1 ("dt-bindings: display: convert Arm Mali-DP to DT schema")
> Link: https://lore.kernel.org/linux-arm-kernel/YnumGEilUblhBx8E@e110455-lin.cambridge.arm.com/
> Signed-off-by: Andre Przywara <andre.przywara at arm.com>
> Reported-by: Liviu Dudau <liviu.dudau at arm.com>

Reviewed-by: Liviu Dudau <liviu.dudau at arm.com>

Thanks for cleaning this up!

Best regards,
Liviu

> ---
>  Documentation/devicetree/bindings/display/arm,malidp.yaml | 7 +------
>  1 file changed, 1 insertion(+), 6 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/display/arm,malidp.yaml b/Documentation/devicetree/bindings/display/arm,malidp.yaml
> index 795a08ac9f128..2a17ec6fc97c0 100644
> --- a/Documentation/devicetree/bindings/display/arm,malidp.yaml
> +++ b/Documentation/devicetree/bindings/display/arm,malidp.yaml
> @@ -71,11 +71,6 @@ properties:
>        - description: number of output lines for the green channel (G)
>        - description: number of output lines for the blue channel (B)
>  
> -  arm,malidp-arqos-high-level:
> -    $ref: /schemas/types.yaml#/definitions/uint32
> -    description:
> -      integer describing the ARQoS levels of DP500's QoS signaling
> -
>    arm,malidp-arqos-value:
>      $ref: /schemas/types.yaml#/definitions/uint32
>      description:
> @@ -113,7 +108,7 @@ examples:
>          clocks = <&oscclk2>, <&fpgaosc0>, <&fpgaosc1>, <&fpgaosc1>;
>          clock-names = "pxlclk", "mclk", "aclk", "pclk";
>          arm,malidp-output-port-lines = /bits/ 8 <8 8 8>;
> -        arm,malidp-arqos-high-level = <0xd000d000>;
> +        arm,malidp-arqos-value = <0xd000d000>;
>  
>          port {
>              dp0_output: endpoint {
> -- 
> 2.25.1
> 

-- 
====================
| I would like to |
| fix the world,  |
| but they're not |
| giving me the   |
 \ source code!  /
  ---------------
    ¯\_(ツ)_/¯



More information about the linux-arm-kernel mailing list