[PATCH v3] arm64: dts: meson: add gpio-fan control to GS-King-X

Furkan Kardame f.kardame at manjaro.org
Fri Jun 10 04:06:09 PDT 2022


GS-King-X has a single speed GPIO fan which is always-on by default. If we add controls for the fan and a trip point, the fan stays off most of the time, reducing background noise from the unit.

Signed-off-by: Furkan Kardame <f.kardame at manjaro.org>
---
Fixed speed-map indentation, aligned bracket, changed cooling-device and increased temperature to 70°C
 .../boot/dts/amlogic/meson-g12b-gsking-x.dts  | 25 +++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts
index 6c7bfacba..23592ae21 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts
@@ -20,6 +20,14 @@ aliases {
 		rtc1 = &vrtc;
 	};
 
+	gpio_fan: gpio-fan {
+		compatible = "gpio-fan";
+		gpios = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>;
+		/* Using Dummy Speed */
+		gpio-fan,speed-map = <0 0>, <1 1>;
+		#cooling-cells = <2>;
+	};
+
 	gpio-keys-polled {
 		compatible = "gpio-keys-polled";
 		#address-cells = <1>;
@@ -96,6 +104,23 @@ &clkc_audio {
 	status = "okay";
 };
 
+&cpu_thermal {
+	trips {
+		cpu_active: cpu-active
+			temperature = <70000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map {
+			trip = <&cpu_active>;
+			cooling-device = <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+		};
+	};
+};
+
 &frddr_a {
 	status = "okay";
 };
-- 
2.36.1




More information about the linux-arm-kernel mailing list