[PATCH v2 10/19] KVM: arm64: Move vcpu SVE/SME flags to the state flag set

[Marc Zyngier]

The two HOST_{SVE,SME}_ENABLED are only used for the host kernel
to track its own state across a vcpu run so that it can be fully
restored.

Move these flags to the so called state set.

Reviewed-by: Fuad Tabba <tabba at google.com>
Signed-off-by: Marc Zyngier <maz at kernel.org>
---
 arch/arm64/include/asm/kvm_host.h |  8 +++++---
 arch/arm64/kvm/fpsimd.c           | 12 ++++++------
 2 files changed, 11 insertions(+), 9 deletions(-)

diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
index 4c7446400b77..4f147bdc5ce9 100644
--- a/arch/arm64/include/asm/kvm_host.h
+++ b/arch/arm64/include/asm/kvm_host.h
@@ -515,6 +515,11 @@ struct kvm_vcpu_arch {
 /* Save TRBE context if active  */
 #define DEBUG_STATE_SAVE_TRBE	__vcpu_single_flag(iflags, BIT(6))
 
+/* SVE enabled for host EL0 */
+#define HOST_SVE_ENABLED	__vcpu_single_flag(sflags, BIT(0))
+/* SME enabled for EL0 */
+#define HOST_SME_ENABLED	__vcpu_single_flag(sflags, BIT(1))
+
 /* Pointer to the vcpu's SVE FFR for sve_{save,load}_state() */
 #define vcpu_sve_pffr(vcpu) (kern_hyp_va((vcpu)->arch.sve_state) +	\
 			     sve_ffr_offset((vcpu)->arch.sve_max_vl))
@@ -536,11 +541,8 @@ struct kvm_vcpu_arch {
 })
 
 /* vcpu_arch flags field values: */
-#define KVM_ARM64_HOST_SVE_ENABLED	(1 << 4) /* SVE enabled for EL0 */
 #define KVM_ARM64_ON_UNSUPPORTED_CPU	(1 << 15) /* Physical CPU not in supported_cpus */
-#define KVM_ARM64_HOST_SME_ENABLED	(1 << 16) /* SME enabled for EL0 */
 #define KVM_ARM64_WFIT			(1 << 17) /* WFIT instruction trapped */
-
 #define KVM_GUESTDBG_VALID_MASK (KVM_GUESTDBG_ENABLE | \
 				 KVM_GUESTDBG_USE_SW_BP | \
 				 KVM_GUESTDBG_USE_HW | \
diff --git a/arch/arm64/kvm/fpsimd.c b/arch/arm64/kvm/fpsimd.c
index d397efe1a378..557a96f8e06a 100644
--- a/arch/arm64/kvm/fpsimd.c
+++ b/arch/arm64/kvm/fpsimd.c
@@ -79,9 +79,9 @@ void kvm_arch_vcpu_load_fp(struct kvm_vcpu *vcpu)
 
 	vcpu->arch.fp_state = FP_STATE_HOST_OWNED;
 
-	vcpu->arch.flags &= ~KVM_ARM64_HOST_SVE_ENABLED;
+	vcpu_clear_flag(vcpu, HOST_SVE_ENABLED);
 	if (read_sysreg(cpacr_el1) & CPACR_EL1_ZEN_EL0EN)
-		vcpu->arch.flags |= KVM_ARM64_HOST_SVE_ENABLED;
+		vcpu_set_flag(vcpu, HOST_SVE_ENABLED);
 
 	/*
 	 * We don't currently support SME guests but if we leave
@@ -93,9 +93,9 @@ void kvm_arch_vcpu_load_fp(struct kvm_vcpu *vcpu)
 	 * operations. Do this for ZA as well for now for simplicity.
 	 */
 	if (system_supports_sme()) {
-		vcpu->arch.flags &= ~KVM_ARM64_HOST_SME_ENABLED;
+		vcpu_clear_flag(vcpu, HOST_SME_ENABLED);
 		if (read_sysreg(cpacr_el1) & CPACR_EL1_SMEN_EL0EN)
-			vcpu->arch.flags |= KVM_ARM64_HOST_SME_ENABLED;
+			vcpu_set_flag(vcpu, HOST_SME_ENABLED);
 
 		if (read_sysreg_s(SYS_SVCR) & (SVCR_SM_MASK | SVCR_ZA_MASK)) {
 			vcpu->arch.fp_state = FP_STATE_FREE;
@@ -164,7 +164,7 @@ void kvm_arch_vcpu_put_fp(struct kvm_vcpu *vcpu)
 	 */
 	if (has_vhe() && system_supports_sme()) {
 		/* Also restore EL0 state seen on entry */
-		if (vcpu->arch.flags & KVM_ARM64_HOST_SME_ENABLED)
+		if (vcpu_get_flag(vcpu, HOST_SME_ENABLED))
 			sysreg_clear_set(CPACR_EL1, 0,
 					 CPACR_EL1_SMEN_EL0EN |
 					 CPACR_EL1_SMEN_EL1EN);
@@ -193,7 +193,7 @@ void kvm_arch_vcpu_put_fp(struct kvm_vcpu *vcpu)
 		 * for EL0.  To avoid spurious traps, restore the trap state
 		 * seen by kvm_arch_vcpu_load_fp():
 		 */
-		if (vcpu->arch.flags & KVM_ARM64_HOST_SVE_ENABLED)
+		if (vcpu_get_flag(vcpu, HOST_SVE_ENABLED))
 			sysreg_clear_set(CPACR_EL1, 0, CPACR_EL1_ZEN_EL0EN);
 		else
 			sysreg_clear_set(CPACR_EL1, CPACR_EL1_ZEN_EL0EN, 0);
-- 
2.34.1