[PATCH net-next v2 4/6] net: phylink: unset ovr_an_inband if fixed-link is selected

[Russell King (Oracle)]

On Fri, Jun 10, 2022 at 11:29:39AM +0800, Ong Boon Leong wrote:
> If "fixed-link" DT or ACPI _DSD subnode is selected, it should take
> precedence over the value of ovr_an_inband passed by MAC driver.
> 
> Fixes: ab39385021d1 ("net: phylink: make phylink_parse_mode() support non-DT platform")
> Tested-by: Emilio Riva <emilio.riva at ericsson.com>
> Signed-off-by: Ong Boon Leong <boon.leong.ong at intel.com>
> ---
>  drivers/net/phy/phylink.c | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
> index 066684b8091..566852815e0 100644
> --- a/drivers/net/phy/phylink.c
> +++ b/drivers/net/phy/phylink.c
> @@ -609,8 +609,10 @@ static int phylink_parse_mode(struct phylink *pl, struct fwnode_handle *fwnode)
>  	const char *managed;
>  
>  	dn = fwnode_get_named_child_node(fwnode, "fixed-link");
> -	if (dn || fwnode_property_present(fwnode, "fixed-link"))
> +	if (dn || fwnode_property_present(fwnode, "fixed-link")) {
>  		pl->cfg_link_an_mode = MLO_AN_FIXED;
> +		pl->config->ovr_an_inband = false;
> +	}

ovr_an_inband was added to support "non-DT" platforms, and the only
place it's set is stmmac. I don't see why you'd want a driver to always
set this member, and then have phylink clear it - the driver should be
setting it correctly itself, otherwise it becomes a "maybe override AN
inband if certain conditions are met" flag inside phylink.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!