[PATCH v10 02/21] dt-bindings: mediatek,dp: Add Display Port binding

[Rex-BC Chen]

On Tue, 2022-05-24 at 11:35 +0800, Chunfeng Yun wrote:
> On Mon, 2022-05-23 at 12:47 +0200, Guillaume Ranquet wrote:
> > From: Markus Schneider-Pargmann <msp at baylibre.com>
> > 
> > This controller is present on several mediatek hardware. Currently
> > mt8195 and mt8395 have this controller without a functional
> > difference,
> > so only one compatible field is added.
> > 
> > The controller can have two forms, as a normal display port and as
> > an
> > embedded display port.
> > 
> > Signed-off-by: Markus Schneider-Pargmann <msp at baylibre.com>
> > Signed-off-by: Guillaume Ranquet <granquet at baylibre.com>
> > ---
> >  .../display/mediatek/mediatek,dp.yaml         | 99
> > +++++++++++++++++++
> >  1 file changed, 99 insertions(+)
> >  create mode 100644
> > Documentation/devicetree/bindings/display/mediatek/mediatek,dp.yaml
> > 
> > diff --git
> > a/Documentation/devicetree/bindings/display/mediatek/mediatek,dp.ya
> > ml
> > b/Documentation/devicetree/bindings/display/mediatek/mediatek,dp.ya
> > ml
> > new file mode 100644
> > index 000000000000..36ae0a6df299
> > --- /dev/null
> > +++
> > b/Documentation/devicetree/bindings/display/mediatek/mediatek,dp.ya
> > ml
> > @@ -0,0 +1,99 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: 
> > http://devicetree.org/schemas/display/mediatek/mediatek,dp.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: MediaTek Display Port Controller
> > +
> > +maintainers:
> > +  - CK Hu <ck.hu at mediatek.com>
> > +  - Jitao shi <jitao.shi at mediatek.com>
> > +
> > +description: |
> > +  Device tree bindings for the MediaTek (embedded) Display Port
> > controller
> > +  present on some MediaTek SoCs.
> > +
> > +properties:
> > +  compatible:
> > +    enum:
> > +      - mediatek,mt8195-dp-tx
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  interrupts:
> > +    maxItems: 1
> > +
> > +  clocks:
> > +    items:
> > +      - description: faxi clock
> > +
> > +  clock-names:
> > +    items:
> > +      - const: faxi
> > +
> > +  power-domains:
> > +    maxItems: 1
> > +
> > +  ports:
> > +    $ref: /schemas/graph.yaml#/properties/ports
> > +    properties:
> > +      port at 0:
> > +        $ref: /schemas/graph.yaml#/properties/port
> > +        description: Input endpoint of the controller, usually
> > dp_intf
> > +
> > +      port at 1:
> > +        $ref: /schemas/graph.yaml#/properties/port
> > +        description: Output endpoint of the controller
> > +
> > +  max-lanes:
> > +    maxItems: 1
> > +    description: maximum number of lanes supported by the hardware
> > +
> > +  max-linkrate:
> > +    maxItems: 1
> > +    description: maximum link rate supported by the hardware
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - interrupts
> > +  - ports
> > +  - max-lanes
> > +  - max-linkrate
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +    #include <dt-bindings/power/mt8195-power.h>
> > +    edp_tx: edp_tx at 1c500000 {
> 
> 'edp_tx: ' can be removed
> 

Hello Chunfeng,

ok, I will drop it.

> > +        compatible = "mediatek,mt8195-dp-tx";
> > +        reg = <0 0x1c500000 0 0x8000>;
> 
> reg = <0x1c500000 0x8000>;
> #address-cells, #size-cells are both 1 by default
> 

I will use "eg = <0x1c500000 0x8000>;" in binding example.

BRs,
Bo-Chen

> > +        interrupts = <GIC_SPI 676 IRQ_TYPE_LEVEL_HIGH 0>;
> > +        power-domains = <&spm MT8195_POWER_DOMAIN_EPD_TX>;
> > +        pinctrl-names = "default";
> > +        pinctrl-0 = <&edp_pin>;
> > +        max-lanes = /bits/ 8 <4>;
> > +        max-linkrate = /bits/ 8 <0x1e>;
> > +
> > +        ports {
> > +            #address-cells = <1>;
> > +            #size-cells = <0>;
> > +
> > +            port at 0 {
> > +                reg = <0>;
> > +                edp_in: endpoint {
> > +                    remote-endpoint = <&dp_intf0_out>;
> > +                };
> > +            };
> > +            port at 1 {
> > +                reg = <1>;
> > +                edp_out: endpoint {
> > +                	remote-endpoint = <&panel_in>;
> > +                };
> > +            };
> > +        };
> > +    };