[PATCH net-next v2 6/6] net: stmmac: make mdio register skips PHY scanning for fixed-link

Ong Boon Leong boon.leong.ong at intel.com
Thu Jun 9 20:29:41 PDT 2022


stmmac_mdio_register() lacks fixed-link consideration and only skip PHY
scanning if it has done DT style PHY discovery. So, for DT or ACPI _DSD
setting of fixed-link, the PHY scanning should not happen.

Tested-by: Emilio Riva <emilio.riva at ericsson.com>
Signed-off-by: Ong Boon Leong <boon.leong.ong at intel.com>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 11 ++++++-----
 drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c | 14 ++++++++++++++
 2 files changed, 20 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 73cae2938f6..bc8edd88175 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -1141,19 +1141,20 @@ static void stmmac_check_pcs_mode(struct stmmac_priv *priv)
  */
 static int stmmac_init_phy(struct net_device *dev)
 {
+	struct fwnode_handle *fwnode = of_fwnode_handle(priv->plat->phylink_node);
 	struct stmmac_priv *priv = netdev_priv(dev);
-	struct device_node *node;
 	int ret;
 
-	node = priv->plat->phylink_node;
+	if (!fwnode)
+		fwnode = dev_fwnode(priv->device);
 
-	if (node)
-		ret = phylink_of_phy_connect(priv->phylink, node, 0);
+	if (fwnode)
+		ret = phylink_fwnode_phy_connect(priv->phylink, fwnode, 0);
 
 	/* Some DT bindings do not set-up the PHY handle. Let's try to
 	 * manually parse it
 	 */
-	if (!node || ret) {
+	if (!fwnode || ret) {
 		int addr = priv->plat->phy_addr;
 		struct phy_device *phydev;
 
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
index 03d3d1f7aa4..5f177ea8072 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
@@ -434,9 +434,11 @@ int stmmac_mdio_register(struct net_device *ndev)
 	int err = 0;
 	struct mii_bus *new_bus;
 	struct stmmac_priv *priv = netdev_priv(ndev);
+	struct fwnode_handle *fwnode = of_fwnode_handle(priv->plat->phylink_node);
 	struct stmmac_mdio_bus_data *mdio_bus_data = priv->plat->mdio_bus_data;
 	struct device_node *mdio_node = priv->plat->mdio_node;
 	struct device *dev = ndev->dev.parent;
+	struct fwnode_handle *fixed_node;
 	int addr, found, max_addr;
 
 	if (!mdio_bus_data)
@@ -490,6 +492,18 @@ int stmmac_mdio_register(struct net_device *ndev)
 	if (priv->plat->has_xgmac)
 		stmmac_xgmac2_mdio_read(new_bus, 0, MII_ADDR_C45);
 
+	/* If fixed-link is set, skip PHY scanning */
+	if (!fwnode)
+		fwnode = dev_fwnode(priv->device);
+
+	if (fwnode) {
+		fixed_node = fwnode_get_named_child_node(fwnode, "fixed-link");
+		if (fixed_node) {
+			fwnode_handle_put(fixed_node);
+			goto bus_register_done;
+		}
+	}
+
 	if (priv->plat->phy_node || mdio_node)
 		goto bus_register_done;
 
-- 
2.25.1




More information about the linux-arm-kernel mailing list