[PATCH v2 12/20] dt-bindings: reset: npcm: Add support for NPCM8XX

[Tomer Maimon]

Hi Krzysztof,

Sorry, but I thought the fix is only to add an explanation to the
dt-binding file as was done in V2.

The NPCM8XX binding is done in the same way as the NPCM7XX and both
use the same reset driver and use the same reset method in upstreamed
NPCM reset driver.

Can you please explain again what you suggest to do?


On Wed, 8 Jun 2022 at 13:11, Krzysztof Kozlowski
<krzysztof.kozlowski at linaro.org> wrote:
>
> On 08/06/2022 11:56, Tomer Maimon wrote:
> > Add binding document and device tree binding
> > constants for Nuvoton BMC NPCM8XX reset controller.
> >
> > Signed-off-by: Tomer Maimon <tmaimon77 at gmail.com>
> > ---
> >  .../bindings/reset/nuvoton,npcm-reset.yaml    |  13 +-
> >  .../dt-bindings/reset/nuvoton,npcm8xx-reset.h | 128 ++++++++++++++++++
> >  2 files changed, 140 insertions(+), 1 deletion(-)
> >  create mode 100644 include/dt-bindings/reset/nuvoton,npcm8xx-reset.h
> >
> > diff --git a/Documentation/devicetree/bindings/reset/nuvoton,npcm-reset.yaml b/Documentation/devicetree/bindings/reset/nuvoton,npcm-reset.yaml
> > index c6bbc1589ab9..93ea81686f58 100644
> > --- a/Documentation/devicetree/bindings/reset/nuvoton,npcm-reset.yaml
> > +++ b/Documentation/devicetree/bindings/reset/nuvoton,npcm-reset.yaml
> > @@ -9,9 +9,20 @@ title: Nuvoton NPCM Reset controller
> >  maintainers:
> >    - Tomer Maimon <tmaimon77 at gmail.com>
> >
> > +description: |
> > +  The NPCM reset controller used to reset various set of peripherals.
> > +  Please refer to reset.txt in this directory for common reset
> > +  controller binding usage.
> > +
> > +  For list of all valid reset indices see
> > +    <dt-bindings/reset/nuvoton,npcm7xx-reset.h> for Poleg NPCM7XX SoC,
> > +    <dt-bindings/reset/nuvoton,npcm8xx-reset.h> for Arbel NPCM8XX SoC.
> > +
> >  properties:
> >    compatible:
> > -    const: nuvoton,npcm750-reset
> > +    enum:
> > +      - nuvoton,npcm750-reset        # Poleg NPCM7XX SoC
> > +      - nuvoton,npcm845-reset        # Arbel NPCM8XX SoC
> >
> >    reg:
> >      maxItems: 1
> > diff --git a/include/dt-bindings/reset/nuvoton,npcm8xx-reset.h b/include/dt-bindings/reset/nuvoton,npcm8xx-reset.h
> > new file mode 100644
> > index 000000000000..5b3b74534b50
> > --- /dev/null
> > +++ b/include/dt-bindings/reset/nuvoton,npcm8xx-reset.h
> > @@ -0,0 +1,128 @@
> > +/* SPDX-License-Identifier: GPL-2.0 */
>
> Again - ignored comment from v1.
>
> > +/*
> > + * Copyright (c) 2022 Nuvoton Technology corporation.
> > + * Author: Tomer Maimon <tmaimon77 at gmail.com>
> > + */
> > +
> > +#ifndef _DT_BINDINGS_NPCM8XX_RESET_H
> > +#define _DT_BINDINGS_NPCM8XX_RESET_H
> > +
> > +/* represent reset register offset */
> > +#define NPCM8XX_RESET_IPSRST1                0x20
> > +#define NPCM8XX_RESET_IPSRST2                0x24
> > +#define NPCM8XX_RESET_IPSRST3                0x34
> > +#define NPCM8XX_RESET_IPSRST4                0x74
> > +
> > +/* Reset lines on IP1 reset module (NPCM8XX_RESET_IPSRST1) */
>
> Again - ignored comment from v1. My last message was quite clear, wasn't it?
>
> https://lore.kernel.org/all/4a69902f-a545-23a1-1430-e5ece16997e9@linaro.org/
>
> You ignored several of previous comments, so:
>
> NAK.
>
> Best regards,
> Krzysztof

Appreciate your time and comments.

Best regards,

Tomer