[PATCH v2 10/11] dt-bindings: display: convert Arm Mali-DP to DT schema

[Andre Przywara]

On Wed, 11 May 2022 13:03:36 +0100
Liviu Dudau <liviu.dudau at arm.com> wrote:

Hi Liviu,

> On Mon, May 09, 2022 at 02:49:01PM +0100, Andre Przywara wrote:
> > On Fri, 06 May 2022 17:39:53 -0500
> > Rob Herring <robh at kernel.org> wrote:
> >   
> > > On Fri, 06 May 2022 15:05:32 +0100, Andre Przywara wrote:  
> > > > The Arm Mali Display Processor (DP) 5xx/6xx is a series of IP that scans
> > > > out a framebuffer and hands the pixels over to a digital signal encoder.
> > > > It supports multiple layers, scaling and rotation.
> > > > 
> > > > Convert the existing DT binding to DT schema.
> > > > 
> > > > Signed-off-by: Andre Przywara <andre.przywara at arm.com>
> > > > ---
> > > >  .../bindings/display/arm,malidp.txt           |  68 ----------
> > > >  .../bindings/display/arm,malidp.yaml          | 116 ++++++++++++++++++
> > > >  2 files changed, 116 insertions(+), 68 deletions(-)
> > > >  delete mode 100644 Documentation/devicetree/bindings/display/arm,malidp.txt
> > > >  create mode 100644 Documentation/devicetree/bindings/display/arm,malidp.yaml
> > > >     
> > > 
> > > Running 'make dtbs_check' with the schema in this patch gives the
> > > following warnings. Consider if they are expected or the schema is
> > > incorrect. These may not be new warnings.
> > > 
> > > Note that it is not yet a requirement to have 0 warnings for dtbs_check.
> > > This will change in the future.
> > > 
> > > Full log is available here: https://patchwork.ozlabs.org/patch/
> > > 
> > > 
> > > display at f080000: 'arm,malidp-arqos-value' does not match any of the regexes: 'pinctrl-[0-9]+'
> > > 	arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dtb
> > > 	arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dtb
> > > 	arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dtb
> > > 	arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dtb
> > > 	arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dtb
> > > 	arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dtb
> > > 	arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dtb
> > > 	arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dtb  
> > 
> > Ah, good point, I missed that directory when testing. I came up with the
> > following change on top:
> > 
> > ==============================
> > diff --git a/Documentation/devicetree/bindings/display/arm,malidp.yaml b/Documentation/devicetree/bindings/display/arm,malidp.yaml
> > index ea7b7100548bf..bc0d3f3ab2b75 100644
> > --- a/Documentation/devicetree/bindings/display/arm,malidp.yaml
> > +++ b/Documentation/devicetree/bindings/display/arm,malidp.yaml
> > @@ -76,6 +76,14 @@ properties:
> >      description:
> >        integer describing the ARQoS levels of DP500's QoS signaling
> >  
> > +  arm,malidp-arqos-value:
> > +    $ref: /schemas/types.yaml#/definitions/uint32
> > +    description:
> > +      Quality-of-Service value for the display engine FIFOs, to write
> > +      into the RQOS register of the DP500.
> > +      See the ARM Mali-DP500 TRM for details on the encoding.
> > +      If omitted, the RQOS register will not be changed.
> > +  
> 
> Actually, this needs to replace 'arm,malidp-arqos-high-level'. Commit ce6eb0253cba
> ("dt/bindings: display: Add optional property node define for Mali DP500") is
> introducing the wrong property (it mentions 'arm,malidp-arqos-value' in the commit
> message). There is no user of 'arm,malidp-arqos-high-level' in the kernel.

Ah, thanks for the report and the background, and sorry for the delay. I
verified that, and sent a patch[1], since this binding here was already
merged.

Cheers,
Andre

[1]
https://lore.kernel.org/linux-arm-kernel/20220609162729.1441760-1-andre.przywara@arm.com/T/#u

> 
> Appologies for signing off on the wrong patch content at that time.
> 
> Best regards,
> Liviu
> 
> >    port:
> >      $ref: /schemas/graph.yaml#/properties/port
> >      unevaluatedProperties: false
> > ==============================
> > 
> > Cheers,
> > Andre  
>