[PATCH v2 32/48] arm64: dts: rockchip: align gpio-key node names with dtschema

Heiko Stübner heiko at sntech.de
Thu Jun 9 08:55:17 PDT 2022


Am Donnerstag, 9. Juni 2022, 17:05:49 CEST schrieb Krzysztof Kozlowski:
> On 09/06/2022 16:56, Heiko Stübner wrote:
> > Am Donnerstag, 9. Juni 2022, 16:15:25 CEST schrieb Krzysztof Kozlowski:
> >> On 09/06/2022 15:57, Maya Matuszczyk wrote:
> >>> czw., 9 cze 2022 o 13:56 Krzysztof Kozlowski
> >>> <krzysztof.kozlowski at linaro.org> napisał(a):
> >>>>
> >>>> The node names should be generic and DT schema expects certain pattern
> >>>> (e.g. with key/button/switch).
> >>>>
> >>>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
> >>>> ---
> >>>>  arch/arm64/boot/dts/rockchip/rk3308-evb.dts   |  2 +-
> >>>>  .../boot/dts/rockchip/rk3326-odroid-go2.dts   | 32 +++++++++----------
> >>>>  .../boot/dts/rockchip/rk3328-nanopi-r2s.dts   |  2 +-
> >>>>  arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi  |  2 +-
> >>>>  .../boot/dts/rockchip/rk3368-geekbox.dts      |  2 +-
> >>>>  .../dts/rockchip/rk3368-orion-r68-meta.dts    |  2 +-
> >>>>  .../boot/dts/rockchip/rk3368-px5-evb.dts      |  2 +-
> >>>>  arch/arm64/boot/dts/rockchip/rk3368-r88.dts   |  2 +-
> >>>>  .../boot/dts/rockchip/rk3399-firefly.dts      |  2 +-
> >>>>  .../dts/rockchip/rk3399-gru-chromebook.dtsi   |  2 +-
> >>>>  .../boot/dts/rockchip/rk3399-gru-kevin.dts    |  2 +-
> >>>>  .../boot/dts/rockchip/rk3399-gru-scarlet.dtsi |  2 +-
> >>>>  .../boot/dts/rockchip/rk3399-khadas-edge.dtsi |  2 +-
> >>>>  .../boot/dts/rockchip/rk3399-nanopi-r4s.dts   |  4 +--
> >>>>  .../boot/dts/rockchip/rk3399-nanopi4.dtsi     |  2 +-
> >>>>  .../boot/dts/rockchip/rk3399-orangepi.dts     |  2 +-
> >>>>  .../boot/dts/rockchip/rk3399-pinebook-pro.dts |  4 +--
> >>>>  .../boot/dts/rockchip/rk3399-roc-pc.dtsi      |  2 +-
> >>>>  .../boot/dts/rockchip/rk3399-rockpro64.dtsi   |  2 +-
> >>>>  .../boot/dts/rockchip/rk3399-sapphire.dtsi    |  2 +-
> >>>>  .../boot/dts/rockchip/rk3566-pinenote.dtsi    |  2 +-
> >>>>  21 files changed, 38 insertions(+), 38 deletions(-)
> >>>>
> >>>> diff --git a/arch/arm64/boot/dts/rockchip/rk3308-evb.dts b/arch/arm64/boot/dts/rockchip/rk3308-evb.dts
> >>>> index 9b4f855ea5d4..4b5413b12bfa 100644
> >>>> --- a/arch/arm64/boot/dts/rockchip/rk3308-evb.dts
> >>>> +++ b/arch/arm64/boot/dts/rockchip/rk3308-evb.dts
> >>>> @@ -75,7 +75,7 @@ gpio-keys {
> >>>>                 pinctrl-names = "default";
> >>>>                 pinctrl-0 = <&pwr_key>;
> >>>>
> >>>> -               power {
> >>>> +               power-key {
> > 
> > hmm, it looks like all the others below are named key-power, while
> > only this uses power-key ?
> > 
> 
> Because a bit earlier in DTS, there are two adc-keys nodes with "key"
> suffix, so I kept that approach to be consistent within one DTS. If you
> prefer, I can change it to key-power.

I just saw that discrepancy and was not sure if that was intentional.
Although with the below, I guess it makes sense to go with
$type-$name, aka key-power, same as button-sw1 etc.


> >>>>                         gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
> >>>>                         linux,code = <KEY_POWER>;
> >>>>                         label = "GPIO Key Power";
> >>>> diff --git a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts
> >>>> index ea0695b51ecd..72328dd993ee 100644
> >>>> --- a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts
> >>>> +++ b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts
> >>>> @@ -71,82 +71,82 @@ gpio-keys {
> >>>>                  * |------------------------------------------------|
> >>>>                  */
> >>>>
> >>>> -               sw1 {
> >>>> +               switch-1 {
> >>> Wouldn't it make more sense to rename this and all other
> >>> renamed nodes in this dts into "button-dpad-up" or "button-1",
> >>> as on the physical device those are buttons and the naming
> >>> scheme of "sw" + number seems to be a carryover from
> >>> downstream sources.
> > 
> > The naming actually carries over from the device itself.
> > In the schematics the relevant keys are also named sw1, sw2, etc.
> > 
> > And I do believe it is way nicer when devicetree names correspond to the
> > things you find in device schematics and not be named "arbitarily" to
> > only conform to some schema ;-)
> 
> Then you are entirely depending on hardware engineers which might start
> calling their buttons "cute-pony-xxx" :)

What's wrong with cute-ponies?
Though it should be button-cute-pony-xxx then ;-)


> > So personally I'd actually prefer going with switch-sw1 (or button-sw1 if
> > you prefer) as being able to just use the search function in schematic pdfs
> > is a helpful tool.
> 
> Both are fine with me, let's just pick one - switch-sw1 or button-sw1.
> Since these are physically buttons, I propose the latter.

fine by me, button-sw1, etc it is then :-)

Heiko





More information about the linux-arm-kernel mailing list