[PATCH v2 21/48] arm64: dts: mediatek: align gpio-key node names with dtschema
Krzysztof Kozlowski
krzysztof.kozlowski at linaro.org
Thu Jun 9 04:39:54 PDT 2022
The node names should be generic and DT schema expects certain pattern
(e.g. with key/button/switch).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
---
.../boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts | 4 ++--
arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 4 ++--
arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts | 6 +++---
arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi | 10 +++++-----
arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi | 4 ++--
arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi | 2 +-
arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 2 +-
arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi | 4 ++--
8 files changed, 18 insertions(+), 18 deletions(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
index 2b9bf8dd14ec..c2311733d2de 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
@@ -40,13 +40,13 @@ cpu at 1 {
gpio-keys {
compatible = "gpio-keys";
- factory {
+ factory-key {
label = "factory";
linux,code = <BTN_0>;
gpios = <&pio 0 GPIO_ACTIVE_HIGH>;
};
- wps {
+ wps-key {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&pio 102 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
index 596c073d8b05..c28da9323a9c 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
@@ -42,13 +42,13 @@ gpio-keys {
compatible = "gpio-keys";
poll-interval = <100>;
- factory {
+ key-factory {
label = "factory";
linux,code = <BTN_0>;
gpios = <&pio 0 0>;
};
- wps {
+ key-wps {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&pio 102 0>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts
index 44f6149c1307..28433b94f7c7 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts
@@ -21,7 +21,7 @@ cpu_crit: cpu_crit0 {
};
&gpio_keys {
- /delete-node/tablet_mode;
- /delete-node/volume_down;
- /delete-node/volume_up;
+ /delete-node/switch-tablet-mode;
+ /delete-node/switch-volume-down;
+ /delete-node/switch-volume-up;
};
diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
index 9c75fbb31f98..d20378758213 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
@@ -53,7 +53,7 @@ gpio_keys: gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&gpio_keys_pins>;
- lid {
+ switch-lid {
label = "Lid";
gpios = <&pio 69 GPIO_ACTIVE_LOW>;
linux,code = <SW_LID>;
@@ -61,7 +61,7 @@ lid {
gpio-key,wakeup;
};
- power {
+ switch-power {
label = "Power";
gpios = <&pio 14 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_POWER>;
@@ -69,7 +69,7 @@ power {
gpio-key,wakeup;
};
- tablet_mode {
+ switch-tablet-mode {
label = "Tablet_mode";
gpios = <&pio 121 GPIO_ACTIVE_HIGH>;
linux,code = <SW_TABLET_MODE>;
@@ -77,13 +77,13 @@ tablet_mode {
gpio-key,wakeup;
};
- volume_down {
+ switch-volume-down {
label = "Volume_down";
gpios = <&pio 123 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
};
- volume_up {
+ switch-volume-up {
label = "Volume_up";
gpios = <&pio 124 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
index 2d7a193272ae..3ac83be53627 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
@@ -73,7 +73,7 @@ volume_buttons: volume-buttons {
pinctrl-names = "default";
pinctrl-0 = <&volume_button_pins>;
- volume_down {
+ button-volume-down {
label = "Volume Down";
linux,code = <KEY_VOLUMEDOWN>;
debounce-interval = <100>;
@@ -81,7 +81,7 @@ volume_down {
gpios = <&pio 6 GPIO_ACTIVE_LOW>;
};
- volume_up {
+ button-volume-up {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
debounce-interval = <100>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi
index 28966a65391b..50a0dd36b5fb 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi
@@ -45,7 +45,7 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pen_eject>;
- pen-insert {
+ switch-pen-insert {
label = "Pen Insert";
/* Insert = low, eject = high */
gpios = <&pio 6 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
index b035e06840e6..b50261e8b9ed 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
@@ -144,7 +144,7 @@ wifi_wakeup: wifi-wakeup {
pinctrl-names = "default";
pinctrl-0 = <&wifi_pins_wakeup>;
- wowlan {
+ button-wowlan {
label = "Wake on WiFi";
gpios = <&pio 113 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_WAKEUP>;
diff --git a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
index 7a717f926929..8ee1529683a3 100644
--- a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
+++ b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
@@ -28,7 +28,7 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&gpio_keys_default>;
- volume-up {
+ key-volume-up {
gpios = <&pio 42 GPIO_ACTIVE_LOW>;
label = "volume_up";
linux,code = <115>;
@@ -36,7 +36,7 @@ volume-up {
debounce-interval = <15>;
};
- volume-down {
+ key-volume-down {
gpios = <&pio 43 GPIO_ACTIVE_LOW>;
label = "volume_down";
linux,code = <114>;
--
2.34.1
More information about the linux-arm-kernel
mailing list