[PATCH v2 17/48] arm64: dts: marvell: align gpio-key node names with dtschema

[Krzysztof Kozlowski]

The node names should be generic and DT schema expects certain pattern
(e.g. with key/button/switch).

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
---
 arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts     | 2 +-
 arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
index caf9c8529fca..6721b9b4cf5c 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
@@ -45,7 +45,7 @@ red {
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		reset {
+		key-reset {
 			label = "reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpiosb 20 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
index 871f84b4a6ed..15f6ca4df121 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
@@ -94,7 +94,7 @@ keys {
 		pinctrl-0 = <&cp0_gpio_reset_pins &cp1_wps_button_pins>;
 		pinctrl-names = "default";
 
-		button_0 {
+		button-0 {
 			/* The rear button */
 			label = "Rear Button";
 			gpios = <&cp0_gpio2 7 GPIO_ACTIVE_LOW>;
@@ -102,7 +102,7 @@ button_0 {
 			linux,code = <BTN_0>;
 		};
 
-		button_1 {
+		button-1 {
 			/* The wps button */
 			label = "WPS Button";
 			gpios = <&cp1_gpio1 30 GPIO_ACTIVE_LOW>;
-- 
2.34.1