[PATCH v2 13/48] arm64: dts: freescale: align gpio-key node names with dtschema
Krzysztof Kozlowski
krzysztof.kozlowski at linaro.org
Thu Jun 9 04:39:32 PDT 2022
The node names should be generic and DT schema expects certain pattern
(e.g. with key/button/switch).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
---
arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts | 4 ++--
arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dts | 6 +++---
arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi | 8 ++++----
arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts | 8 ++++----
arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts | 8 ++++----
arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts | 6 +++---
arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi | 2 +-
arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts | 6 +++---
arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts | 8 ++++----
arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi | 2 +-
arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts | 6 +++---
arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi | 4 ++--
arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts | 2 +-
.../arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtsi | 2 +-
arch/arm64/boot/dts/freescale/mba8mx.dtsi | 6 +++---
15 files changed, 39 insertions(+), 39 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts
index d3f03dcbb8c3..aa38f5379558 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts
@@ -35,14 +35,14 @@ buttons {
* external power off (e.g ATX Power Button)
* asserted
*/
- powerdn {
+ button-powerdn {
label = "External Power Down";
gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
};
/* Rear Panel 'ADMIN' button (GPIO_H) */
- admin {
+ button-admin {
label = "ADMIN button";
gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_WPS_BUTTON>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dts
index ac1fe1530ac7..d643381417f1 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dts
@@ -36,19 +36,19 @@ reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
gpio-keys {
compatible = "gpio-keys";
- back {
+ key-back {
label = "Back";
gpios = <&pca9534 1 GPIO_ACTIVE_LOW>;
linux,code = <KEY_BACK>;
};
- home {
+ key-home {
label = "Home";
gpios = <&pca9534 2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_HOME>;
};
- menu {
+ key-menu {
label = "Menu";
gpios = <&pca9534 3 GPIO_ACTIVE_LOW>;
linux,code = <KEY_MENU>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi
index 00f86cada30d..5bcd3b77fe83 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi
@@ -16,13 +16,13 @@ memory at 40000000 {
gpio-keys {
compatible = "gpio-keys";
- user-pb {
+ key-user-pb {
label = "user_pb";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
};
- user-pb1x {
+ key-user-pb1x {
label = "user_pb1x";
linux,code = <BTN_1>;
interrupt-parent = <&gsc>;
@@ -36,14 +36,14 @@ key-erased {
interrupts = <1>;
};
- eeprom-wp {
+ key-eeprom-wp {
label = "eeprom_wp";
linux,code = <BTN_3>;
interrupt-parent = <&gsc>;
interrupts = <2>;
};
- tamper {
+ key-tamper {
label = "tamper";
linux,code = <BTN_4>;
interrupt-parent = <&gsc>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
index 24737e89038a..35fb929e7bcc 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
@@ -38,13 +38,13 @@ memory at 40000000 {
gpio-keys {
compatible = "gpio-keys";
- user-pb {
+ key-user-pb {
label = "user_pb";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
};
- user-pb1x {
+ key-user-pb1x {
label = "user_pb1x";
linux,code = <BTN_1>;
interrupt-parent = <&gsc>;
@@ -58,14 +58,14 @@ key-erased {
interrupts = <1>;
};
- eeprom-wp {
+ key-eeprom-wp {
label = "eeprom_wp";
linux,code = <BTN_3>;
interrupt-parent = <&gsc>;
interrupts = <2>;
};
- tamper {
+ key-tamper {
label = "tamper";
linux,code = <BTN_4>;
interrupt-parent = <&gsc>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts
index 407ab4592b4c..79107e287d92 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts
@@ -42,13 +42,13 @@ can20m: can20m {
gpio-keys {
compatible = "gpio-keys";
- user-pb {
+ key-user-pb {
label = "user_pb";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
};
- user-pb1x {
+ key-user-pb1x {
label = "user_pb1x";
linux,code = <BTN_1>;
interrupt-parent = <&gsc>;
@@ -62,14 +62,14 @@ key-erased {
interrupts = <1>;
};
- eeprom-wp {
+ key-eeprom-wp {
label = "eeprom_wp";
linux,code = <BTN_3>;
interrupt-parent = <&gsc>;
interrupts = <2>;
};
- tamper {
+ key-tamper {
label = "tamper";
linux,code = <BTN_4>;
interrupt-parent = <&gsc>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts
index a7dae9bd4c11..a65761a53f23 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts
@@ -33,13 +33,13 @@ memory at 40000000 {
gpio-keys {
compatible = "gpio-keys";
- user-pb {
+ key-user-pb {
label = "user_pb";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
};
- user-pb1x {
+ key-user-pb1x {
label = "user_pb1x";
linux,code = <BTN_1>;
interrupt-parent = <&gsc>;
@@ -53,7 +53,7 @@ key-erased {
interrupts = <1>;
};
- eeprom-wp {
+ key-eeprom-wp {
label = "eeprom_wp";
linux,code = <BTN_3>;
interrupt-parent = <&gsc>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
index eafa88d980b3..a8c329cb4c28 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
@@ -43,7 +43,7 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_keys>;
- wakeup {
+ key-wakeup {
debounce-interval = <10>;
/* Verdin CTRL_WAKE1_MICO# (SODIMM 252) */
gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts
index f61c48776cf3..3ed7021a487c 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts
@@ -26,19 +26,19 @@ reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
gpio-keys {
compatible = "gpio-keys";
- back {
+ key-back {
label = "Back";
gpios = <&pca9534 1 GPIO_ACTIVE_LOW>;
linux,code = <KEY_BACK>;
};
- home {
+ key-home {
label = "Home";
gpios = <&pca9534 2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_HOME>;
};
- menu {
+ key-menu {
label = "Menu";
gpios = <&pca9534 3 GPIO_ACTIVE_LOW>;
linux,code = <KEY_MENU>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts
index 367a232675aa..636f8602b979 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts
@@ -39,13 +39,13 @@ can20m: can20m {
gpio-keys {
compatible = "gpio-keys";
- user-pb {
+ key-user-pb {
label = "user_pb";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
};
- user-pb1x {
+ key-user-pb1x {
label = "user_pb1x";
linux,code = <BTN_1>;
interrupt-parent = <&gsc>;
@@ -59,14 +59,14 @@ key-erased {
interrupts = <1>;
};
- eeprom-wp {
+ key-eeprom-wp {
label = "eeprom_wp";
linux,code = <BTN_3>;
interrupt-parent = <&gsc>;
interrupts = <2>;
};
- tamper {
+ key-tamper {
label = "tamper";
linux,code = <BTN_4>;
interrupt-parent = <&gsc>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
index fb17e329cd37..8c38f89df0ad 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
@@ -49,7 +49,7 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_keys>;
- wakeup {
+ button-wakeup {
debounce-interval = <10>;
/* Verdin CTRL_WAKE1_MICO# (SODIMM 252) */
gpios = <&gpio4 0 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
index b86f188a440d..6445c6b90b5b 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
@@ -36,21 +36,21 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_keys>;
- btn1 {
+ button-1 {
label = "VOL_UP";
gpios = <&gpio4 21 GPIO_ACTIVE_LOW>;
wakeup-source;
linux,code = <KEY_VOLUMEUP>;
};
- btn2 {
+ button-2 {
label = "VOL_DOWN";
gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
wakeup-source;
linux,code = <KEY_VOLUMEDOWN>;
};
- wwan-wake {
+ button-3 {
label = "WWAN_WAKE";
gpios = <&gpio3 8 GPIO_ACTIVE_LOW>;
interrupt-parent = <&gpio3>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
index 587e55aaa57b..9eec8a7eecfc 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
@@ -37,7 +37,7 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_keys>;
- vol-down {
+ key-vol-down {
label = "VOL_DOWN";
gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
@@ -45,7 +45,7 @@ vol-down {
wakeup-source;
};
- vol-up {
+ key-vol-up {
label = "VOL_UP";
gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts b/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts
index f70fb32b96b0..54c739f293b8 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts
@@ -26,7 +26,7 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_keys>;
- power {
+ button-power {
label = "Power Button";
gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtsi
index 144fc9e82da7..c11fd1078bdb 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtsi
@@ -16,7 +16,7 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpiokeys>;
- wakeup {
+ key-wakeup {
label = "Wake-Up";
gpios = <&lsio_gpio3 10 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_WAKEUP>;
diff --git a/arch/arm64/boot/dts/freescale/mba8mx.dtsi b/arch/arm64/boot/dts/freescale/mba8mx.dtsi
index c2f0f1a1566c..aab1aee49893 100644
--- a/arch/arm64/boot/dts/freescale/mba8mx.dtsi
+++ b/arch/arm64/boot/dts/freescale/mba8mx.dtsi
@@ -26,21 +26,21 @@ gpio-keys {
pinctrl-0 = <&pinctrl_gpiobutton>;
autorepeat;
- switch1 {
+ switch-1 {
label = "switch1";
linux,code = <BTN_0>;
gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
wakeup-source;
};
- btn2: switch2 {
+ btn2: switch-2 {
label = "switch2";
linux,code = <BTN_1>;
gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
wakeup-source;
};
- switch3 {
+ switch-3 {
label = "switch3";
linux,code = <BTN_2>;
gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
--
2.34.1
More information about the linux-arm-kernel
mailing list