[PATCH v2] soc: imx: gpcv2: print errno for regulator errors

[Martin Kepplinger]

Make debugging of power management issues easier by printing the reason
why a regulator fails to be enabled or disabled.

Signed-off-by: Martin Kepplinger <martin.kepplinger at puri.sm>
---

revision history
----------------
v2: (thank you Ahmad)
 * use %pe format
 * sent out a bit early because it's pretty obvious
v1:
https://lore.kernel.org/linux-arm-kernel/64828809-1eb7-dff3-da57-95b545aefc22@pengutronix.de/T/#t


 drivers/soc/imx/gpcv2.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/soc/imx/gpcv2.c b/drivers/soc/imx/gpcv2.c
index 85aa86e1338a..6383a4edc360 100644
--- a/drivers/soc/imx/gpcv2.c
+++ b/drivers/soc/imx/gpcv2.c
@@ -328,7 +328,9 @@ static int imx_pgc_power_up(struct generic_pm_domain *genpd)
 	if (!IS_ERR(domain->regulator)) {
 		ret = regulator_enable(domain->regulator);
 		if (ret) {
-			dev_err(domain->dev, "failed to enable regulator\n");
+			dev_err(domain->dev,
+				"failed to enable regulator: %pe\n",
+				ERR_PTR(ret));
 			goto out_put_pm;
 		}
 	}
@@ -467,7 +469,9 @@ static int imx_pgc_power_down(struct generic_pm_domain *genpd)
 	if (!IS_ERR(domain->regulator)) {
 		ret = regulator_disable(domain->regulator);
 		if (ret) {
-			dev_err(domain->dev, "failed to disable regulator\n");
+			dev_err(domain->dev,
+				"failed to disable regulator: %pe\n",
+				ERR_PTR(ret));
 			return ret;
 		}
 	}
-- 
2.30.2