[PATCH v6 2/3] PCI: qcom: Define slot capabilities using PCI_EXP_SLTCAP_*

[Pali Rohár]

On Thursday 09 June 2022 06:27:34 Baruch Siach wrote:
> Hi Pali,
> 
> On Thu, Jun 09 2022, Pali Rohár wrote:
> > On Monday 07 February 2022 16:51:25 Baruch Siach wrote:
> >> From: Baruch Siach <baruch.siach at siklu.com>
> >> 
> >> The PCIE_CAP_LINK1_VAL macro actually defines slot capabilities. Use
> >> PCI_EXP_SLTCAP_* macros to spell its value, and rename it to better
> >> describe its meaning.
> >> 
> >> Signed-off-by: Baruch Siach <baruch.siach at siklu.com>
> >> ---
> >>  drivers/pci/controller/dwc/pcie-qcom.c | 15 +++++++++++++--
> >>  1 file changed, 13 insertions(+), 2 deletions(-)
> >> 
> >> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> >> index c19cd506ed3f..01e58b057d2a 100644
> >> --- a/drivers/pci/controller/dwc/pcie-qcom.c
> >> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> >> @@ -69,7 +69,18 @@
> >>  #define PCIE20_AXI_MSTR_RESP_COMP_CTRL1		0x81c
> >>  #define CFG_BRIDGE_SB_INIT			BIT(0)
> >>  
> >> -#define PCIE_CAP_LINK1_VAL			0x2FD7F
> >> +#define PCIE_CAP_SLOT_POWER_LIMIT_VAL		0x7D00
> >> +#define PCIE_CAP_SLOT_POWER_LIMIT_SCALE		0x8000
> >
> > Hello!
> >
> > Please do not use hardcoded values for slot power limit value and scale
> > numbers. There are macros PCI_EXP_SLTCAP_SPLV and PCI_EXP_SLTCAP_SPLS
> > for composing mask:
> > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/include/uapi/linux/pci_regs.h?h=v5.19-rc1#n593
> > Which could be used together with FIELD_PREP(). See e.g. aardvark commit:
> > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=0d5b8c298545c827ca9f2461b2655277ce0aef79
> 
> Thanks for the tip.
> 
> > And the important information: Slot power limit is board specific and
> > depends on how power supply and power regulators are designed. So slot
> > power limit **cannot** be hardcoded in driver. Instead this value should
> > be read from device tree file for the current board.
> >
> > There is a new kernel function of_pci_get_slot_power_limit() which reads
> > it and compose PCIe slot power limit value and scale numbers. See:
> > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/pci/of.c?h=v5.19-rc1#n631
> 
> The 'slot-power-limit-milliwatt' property appears to be undocumented as
> of v5.19-rc1.

slot-power-limit-milliwatt is already documented in DT scheme pci-bus, see:
https://github.com/devicetree-org/dt-schema/blob/main/dtschema/schemas/pci/pci-bus.yaml

> This patch should make no functional change. I guess we should keep the
> default hard-coded driver value for compatibility with existing DTs with
> no 'slot-power-limit-milliwatt'.
> 
> Thanks,
> baruch
> 
> >> +#define PCIE_CAP_SLOT_VAL			(PCI_EXP_SLTCAP_ABP | \
> >> +						PCI_EXP_SLTCAP_PCP | \
> >> +						PCI_EXP_SLTCAP_MRLSP | \
> >> +						PCI_EXP_SLTCAP_AIP | \
> >> +						PCI_EXP_SLTCAP_PIP | \
> >> +						PCI_EXP_SLTCAP_HPS | \
> >> +						PCI_EXP_SLTCAP_HPC | \
> >> +						PCI_EXP_SLTCAP_EIP | \
> >> +						PCIE_CAP_SLOT_POWER_LIMIT_VAL | \
> >> +						PCIE_CAP_SLOT_POWER_LIMIT_SCALE)
> >>  
> >>  #define PCIE20_PARF_Q2A_FLUSH			0x1AC
> >>  
> >> @@ -1111,7 +1122,7 @@ static int qcom_pcie_init_2_3_3(struct qcom_pcie *pcie)
> >>  
> >>  	writel(PCI_COMMAND_MASTER, pci->dbi_base + PCI_COMMAND);
> >>  	writel(DBI_RO_WR_EN, pci->dbi_base + PCIE20_MISC_CONTROL_1_REG);
> >> -	writel(PCIE_CAP_LINK1_VAL, pci->dbi_base + offset + PCI_EXP_SLTCAP);
> >> +	writel(PCIE_CAP_SLOT_VAL, pci->dbi_base + offset + PCI_EXP_SLTCAP);
> >>  
> >>  	val = readl(pci->dbi_base + offset + PCI_EXP_LNKCAP);
> >>  	val &= ~PCI_EXP_LNKCAP_ASPMS;
> >> -- 
> >> 2.34.1
> >> 
> 
> 
> -- 
>                                                      ~. .~   Tk Open Systems
> =}------------------------------------------------ooO--U--Ooo------------{=
>    - baruch at tkos.co.il - tel: +972.52.368.4656, http://www.tkos.co.il -