[PATCH] ARM: dts: ux500: Fix Janice accelerometer mounting matrix

[Linus Walleij]

This was fixed wrong so fix it again. Now verified by using
iio-sensor-proxy monitor-sensor test program.

Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
---
 arch/arm/boot/dts/ste-ux500-samsung-janice.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/ste-ux500-samsung-janice.dts b/arch/arm/boot/dts/ste-ux500-samsung-janice.dts
index d097d5701894..f80111b89b8b 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-janice.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-janice.dts
@@ -650,8 +650,8 @@ i2c-gate {
 					accelerometer at 8 {
 						compatible = "bosch,bma222";
 						reg = <0x08>;
-						mount-matrix = "0", "1", "0",
-							       "-1", "0", "0",
+						mount-matrix = "0", "-1", "0",
+							       "1", "0", "0",
 							       "0", "0", "1";
 						vddio-supply = <&ab8500_ldo_aux2_reg>; // 1.8V
 						vdd-supply = <&ab8500_ldo_aux1_reg>; // 3V
-- 
2.36.1