[PATCH 11/16] iio: adc: at91-sama5d2_adc: add locking parameter to at91_adc_read_info_raw()

[Claudiu Beznea]

Add a parameter to at91_adc_read_info_raw() to specify if st->lock mutex
need to be acquired. This prepares for the addition of temperature sensor
code which will re-use at91_adc_read_info_raw() function to read 2 voltages
for determining the real temperature.

Signed-off-by: Claudiu Beznea <claudiu.beznea at microchip.com>
---
 drivers/iio/adc/at91-sama5d2_adc.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/drivers/iio/adc/at91-sama5d2_adc.c b/drivers/iio/adc/at91-sama5d2_adc.c
index 1283bcf4e682..8f8fef42de84 100644
--- a/drivers/iio/adc/at91-sama5d2_adc.c
+++ b/drivers/iio/adc/at91-sama5d2_adc.c
@@ -1583,7 +1583,8 @@ static irqreturn_t at91_adc_interrupt(int irq, void *private)
 }
 
 static int at91_adc_read_info_raw(struct iio_dev *indio_dev,
-				  struct iio_chan_spec const *chan, int *val)
+				  struct iio_chan_spec const *chan, int *val,
+				  bool lock)
 {
 	struct at91_adc_state *st = iio_priv(indio_dev);
 	int (*fn)(struct at91_adc_state *, int, u16 *) = NULL;
@@ -1602,13 +1603,15 @@ static int at91_adc_read_info_raw(struct iio_dev *indio_dev,
 	ret = iio_device_claim_direct_mode(indio_dev);
 	if (ret)
 		return ret;
-	mutex_lock(&st->lock);
+	if (lock)
+		mutex_lock(&st->lock);
 
 	if (fn) {
 		ret = fn(st, chan->channel, &tmp_val);
 		*val = tmp_val;
 		ret = at91_adc_adjust_val_osr(st, val);
-		mutex_unlock(&st->lock);
+		if (lock)
+			mutex_unlock(&st->lock);
 		iio_device_release_direct_mode(indio_dev);
 
 		return ret;
@@ -1644,7 +1647,8 @@ static int at91_adc_read_info_raw(struct iio_dev *indio_dev,
 	/* Needed to ACK the DRDY interruption */
 	at91_adc_readl(st, LCDR);
 
-	mutex_unlock(&st->lock);
+	if (lock)
+		mutex_unlock(&st->lock);
 
 	iio_device_release_direct_mode(indio_dev);
 	return ret;
@@ -1658,7 +1662,8 @@ static int at91_adc_read_raw(struct iio_dev *indio_dev,
 
 	switch (mask) {
 	case IIO_CHAN_INFO_RAW:
-		return at91_adc_read_info_raw(indio_dev, chan, val);
+		return at91_adc_read_info_raw(indio_dev, chan, val, true);
+
 	case IIO_CHAN_INFO_SCALE:
 		*val = st->vref_uv / 1000;
 		if (chan->differential)
-- 
2.34.1