[PATCH V6 0/4] arm64: add i.MX93 support

[Peng Fan (OSS)]

Hi Shawn,

> Subject: [PATCH V6 0/4] arm64: add i.MX93 support

Is there a chance to get this patchset into your tree?

Thanks,
Peng.
> 
> From: Peng Fan <peng.fan at nxp.com>
> 
> Sorry for sending several versions in short time, just wanna to catch 5.19
> 
> V6:
>  Per Fabio's comments, drop unused uart2/uart5 pinmux
> 
> V5:
>  Add R-b from Aisheng
>  drop iomuxc status from board dts
> 
> V4:
>  Add A-b
>  In patch 1 to move imx93 behind imx8ulp  Drop a whitespace in patch 2
> 
> V3:
>  Add a new patch patch 1 for board binding doc  Add A-b from Rob  Fix dtb
> warnings.
> 
> V2:
>  Update License
> 
> Add i.MX93 dtsi and 11x11 evk board support
> 
> The required bindings and drivers has already been in tree.
> There arem checkpatch error for the pin header files as other i.MX pin pin
> header files.
> 
> 
> Peng Fan (4):
>   dt-bindings: arm: fsl: add imx93 11x11 evk board
>   arm64: dts: freescale: Add i.MX93 dtsi support
>   arm64: dts: freescale: add i.MX93 11x11 EVK basic support
>   arm64: defconfig: enable i.MX93 clk & pinctrl
> 
>  .../devicetree/bindings/arm/fsl.yaml          |   6 +
>  arch/arm64/boot/dts/freescale/Makefile        |   1 +
>  .../boot/dts/freescale/imx93-11x11-evk.dts    | 114 ++++
>  arch/arm64/boot/dts/freescale/imx93-pinfunc.h | 623
> ++++++++++++++++++
>  arch/arm64/boot/dts/freescale/imx93.dtsi      | 334 ++++++++++
>  arch/arm64/configs/defconfig                  |   2 +
>  6 files changed, 1080 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
>  create mode 100755 arch/arm64/boot/dts/freescale/imx93-pinfunc.h
>  create mode 100644 arch/arm64/boot/dts/freescale/imx93.dtsi
> 
> --
> 2.25.1