[PATCH v2 4/9] remoteproc: mediatek: Support probing for the 2nd core of dual-core SCP
Tinghan Shen
tinghan.shen at mediatek.com
Wed Jun 8 01:35:48 PDT 2022
The mtk_scp.c driver only supports the single core SCP and the
1st core of a dual-core SCP. This patch extends it for the 2nd core.
MT8195 SCP is a dual-core MCU. Both cores are housed in the same subsys.
They have the same viewpoint of registers and memory.
Core 1 of the SCP features its own set of core configuration registers,
interrupt controller, timers, and DMAs. The rest of the peripherals
in this subsystem are shared by core 0 and core 1.
As for memory, core 1 has its own cache memory. the SCP SRAM is shared
by core 0 and core 1.
Signed-off-by: Tinghan Shen <tinghan.shen at mediatek.com>
---
drivers/remoteproc/mtk_scp.c | 22 ++++++++++++++++++++--
1 file changed, 20 insertions(+), 2 deletions(-)
diff --git a/drivers/remoteproc/mtk_scp.c b/drivers/remoteproc/mtk_scp.c
index 3510c6d0bbc8..91b4aefde4ac 100644
--- a/drivers/remoteproc/mtk_scp.c
+++ b/drivers/remoteproc/mtk_scp.c
@@ -23,6 +23,10 @@
#define MAX_CODE_SIZE 0x500000
#define SECTION_NAME_IPI_BUFFER ".ipi_buffer"
+#define SCP_CORE_0 0
+#define SCP_CORE_1 1
+#define SCP_CORE_SINGLE 0xF
+
/**
* scp_get() - get a reference to SCP.
*
@@ -836,6 +840,7 @@ static int scp_probe(struct platform_device *pdev)
struct resource *res;
const char *fw_name = "scp.img";
int ret, i;
+ u32 core_id = SCP_CORE_SINGLE;
ret = rproc_of_parse_firmware(dev, 0, &fw_name);
if (ret < 0 && ret != -EINVAL)
@@ -851,8 +856,16 @@ static int scp_probe(struct platform_device *pdev)
scp->data = of_device_get_match_data(dev);
platform_set_drvdata(pdev, scp);
+ ret = of_property_read_u32_index(dev->of_node, "mediatek,scp-core", 1, &core_id);
+ if (ret == 0)
+ dev_info(dev, "Boot SCP dual core %u\n", core_id);
+
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "sram");
- scp->sram_base = devm_ioremap_resource(dev, res);
+ if (core_id == SCP_CORE_1)
+ scp->sram_base = devm_ioremap(dev, res->start, resource_size(res));
+ else
+ scp->sram_base = devm_ioremap_resource(dev, res);
+
if (IS_ERR(scp->sram_base))
return dev_err_probe(dev, PTR_ERR(scp->sram_base),
"Failed to parse and map sram memory\n");
@@ -873,7 +886,12 @@ static int scp_probe(struct platform_device *pdev)
scp->l1tcm_phys = res->start;
}
- scp->reg_base = devm_platform_ioremap_resource_byname(pdev, "cfg");
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cfg");
+ if (core_id == SCP_CORE_1)
+ scp->reg_base = devm_ioremap(dev, res->start, resource_size(res));
+ else
+ scp->reg_base = devm_ioremap_resource(dev, res);
+
if (IS_ERR(scp->reg_base))
return dev_err_probe(dev, PTR_ERR(scp->reg_base),
"Failed to parse and map cfg memory\n");
--
2.18.0
More information about the linux-arm-kernel
mailing list