[PATCH v9 02/12] arm64: dts: freescale: Add the imx8dxl connectivity subsys dtsi
Abel Vesa
abel.vesa at nxp.com
Tue Jun 7 04:16:15 PDT 2022
From: Jacky Bai <ping.bai at nxp.com>
On i.MX8DXL, the Connectivity subsystem includes below peripherals:
1x ENET with AVB support, 1x ENET with TSN support, 2x USB OTG,
1x eMMC, 2x SD, 1x NAND.
Signed-off-by: Jacky Bai <ping.bai at nxp.com>
Signed-off-by: Abel Vesa <abel.vesa at nxp.com>
---
.../boot/dts/freescale/imx8dxl-ss-conn.dtsi | 134 ++++++++++++++++++
1 file changed, 134 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi
new file mode 100644
index 000000000000..d10d1bf76df7
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi
@@ -0,0 +1,134 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019-2021 NXP
+ */
+
+/delete-node/ &enet1_lpcg;
+/delete-node/ &fec2;
+
+&conn_subsys {
+ conn_enet0_root_clk: clock-conn-enet0-root at 0 {
+ compatible = "fixed-clock";
+ reg = <0 0>;
+ #clock-cells = <0>;
+ clock-frequency = <250000000>;
+ clock-output-names = "conn_enet0_root_clk";
+ };
+
+ eqos: ethernet at 5b050000 {
+ compatible = "nxp,imx8dxl-dwmac-eqos", "snps,dwmac-5.10a";
+ reg = <0x5b050000 0x10000>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "eth_wake_irq", "macirq";
+ clocks = <&eqos_lpcg IMX_LPCG_CLK_2>,
+ <&eqos_lpcg IMX_LPCG_CLK_4>,
+ <&eqos_lpcg IMX_LPCG_CLK_0>,
+ <&eqos_lpcg IMX_LPCG_CLK_3>,
+ <&eqos_lpcg IMX_LPCG_CLK_1>;
+ clock-names = "stmmaceth", "pclk", "ptp_ref", "tx", "mem";
+ assigned-clocks = <&clk IMX_SC_R_ENET_1 IMX_SC_PM_CLK_PER>;
+ assigned-clock-rates = <125000000>;
+ power-domains = <&pd IMX_SC_R_ENET_1>;
+ status = "disabled";
+ };
+
+ usbotg2: usb at 5b0e0000 {
+ compatible = "fsl,imx8dxl-usb", "fsl,imx7ulp-usb";
+ reg = <0x5b0e0000 0x200>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+ fsl,usbphy = <&usbphy2>;
+ fsl,usbmisc = <&usbmisc2 0>;
+ /*
+ * usbotg1 and usbotg2 share one clock
+ * scfw disable clock access and keep it always on
+ * in case other core (M4) use one of these.
+ */
+ clocks = <&clk_dummy>;
+ ahb-burst-config = <0x0>;
+ tx-burst-size-dword = <0x10>;
+ rx-burst-size-dword = <0x10>;
+ power-domains = <&pd IMX_SC_R_USB_1>;
+ status = "disabled";
+ };
+
+ usbmisc2: usb at 5b0e0200 {
+ #index-cells = <1>;
+ compatible = "fsl,imx8dxl-usbmisc", "fsl,imx7ulp-usbmisc";
+ reg = <0x5b0e0200 0x200>;
+ };
+
+ usbphy2: phy at 5b110000 {
+ compatible = "fsl,imx8dxl-usbphy", "fsl,imx7ulp-usbphy";
+ reg = <0x5b110000 0x1000>;
+ clocks = <&usb2_2_lpcg IMX_LPCG_CLK_7>;
+ status = "disabled";
+ };
+
+ eqos_lpcg: clock-controller at 5b240000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x5b240000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&conn_enet0_root_clk>,
+ <&conn_axi_clk>,
+ <&conn_axi_clk>,
+ <&clk IMX_SC_R_ENET_1 IMX_SC_PM_CLK_PER>,
+ <&conn_ipg_clk>;
+ clock-indices = <IMX_LPCG_CLK_0>,
+ <IMX_LPCG_CLK_2>,
+ <IMX_LPCG_CLK_4>,
+ <IMX_LPCG_CLK_5>,
+ <IMX_LPCG_CLK_6>;
+ clock-output-names = "eqos_ptp",
+ "eqos_mem_clk",
+ "eqos_aclk",
+ "eqos_clk",
+ "eqos_csr_clk";
+ power-domains = <&pd IMX_SC_R_ENET_1>;
+ };
+
+ usb2_2_lpcg: clock-controller at 5b280000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x5b280000 0x10000>;
+ #clock-cells = <1>;
+ clock-indices = <IMX_LPCG_CLK_7>;
+ clocks = <&conn_ipg_clk>;
+ clock-output-names = "usboh3_2_phy_ipg_clk";
+ };
+};
+
+&enet0_lpcg {
+ clocks = <&conn_enet0_root_clk>,
+ <&conn_enet0_root_clk>,
+ <&conn_axi_clk>,
+ <&clk IMX_SC_R_ENET_0 IMX_SC_C_TXCLK>,
+ <&conn_ipg_clk>,
+ <&conn_ipg_clk>;
+};
+
+&fec1 {
+ compatible = "fsl,imx8dxl-fec", "fsl,imx8qm-fec";
+ interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+ assigned-clocks = <&clk IMX_SC_R_ENET_0 IMX_SC_C_CLKDIV>;
+ assigned-clock-rates = <125000000>;
+};
+
+&usdhc1 {
+ compatible = "fsl,imx8dxl-usdhc", "fsl,imx8qxp-usdhc";
+ interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&usdhc2 {
+ compatible = "fsl,imx8dxl-usdhc", "fsl,imx8qxp-usdhc";
+ interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&usdhc3 {
+ compatible = "fsl,imx8dxl-usdhc", "fsl,imx8qxp-usdhc";
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+};
--
2.34.3
More information about the linux-arm-kernel
mailing list