[PATCH 2/2] ARM: omap1: enable multiplatform
Arnd Bergmann
arnd at kernel.org
Fri Jun 3 11:58:26 PDT 2022
From: Arnd Bergmann <arnd at arndb.de>
With all the header files out of the way, and the clock driver
converted to the common framework, nothing stops us from building
OMAP together with the other platforms.
As usual, the decompressor support is a victim here, and is
only available when CONFIG_DEBUG_LL is configured for the
particular board.
Acked-by: Tony Lindgren <tony at atomide.com>
Signed-off-by: Arnd Bergmann <arnd at arndb.de>
---
arch/arm/Kconfig | 13 --
arch/arm/configs/omap1_defconfig | 3 +
arch/arm/mach-omap1/Kconfig | 16 +++
arch/arm/mach-omap1/hardware.h | 2 +-
arch/arm/mach-omap1/include/mach/uncompress.h | 117 ------------------
arch/arm/mach-omap1/serial.c | 3 +-
.../mach-omap1/{include/mach => }/serial.h | 0
7 files changed, 21 insertions(+), 133 deletions(-)
delete mode 100644 arch/arm/mach-omap1/include/mach/uncompress.h
rename arch/arm/mach-omap1/{include/mach => }/serial.h (100%)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index f182f32145a8..7630ba9cb6cc 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -396,19 +396,6 @@ config ARCH_SA1100
help
Support for StrongARM 11x0 based boards.
-config ARCH_OMAP1
- bool "TI OMAP1"
- depends on CPU_LITTLE_ENDIAN
- select CLKSRC_MMIO
- select FORCE_PCI if PCCARD
- select GENERIC_IRQ_CHIP
- select GPIOLIB
- select HAVE_LEGACY_CLK
- select IRQ_DOMAIN
- select SPARSE_IRQ
- help
- Support for older TI OMAP1 (omap7xx, omap15xx or omap16xx)
-
endchoice
menu "Multiple platform selection"
diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig
index 3148567b66b6..14c17a218ec5 100644
--- a/arch/arm/configs/omap1_defconfig
+++ b/arch/arm/configs/omap1_defconfig
@@ -17,6 +17,9 @@ CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
+CONFIG_ARCH_MULTI_V4T=y
+CONFIG_ARCH_MULTI_V5=y
+# CONFIG_ARCH_MULTI_V7 is not set
CONFIG_ARCH_OMAP=y
CONFIG_ARCH_OMAP1=y
CONFIG_OMAP_RESET_CLOCKS=y
diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
index d4b0cd91a4f9..0ac0567f721d 100644
--- a/arch/arm/mach-omap1/Kconfig
+++ b/arch/arm/mach-omap1/Kconfig
@@ -1,4 +1,16 @@
# SPDX-License-Identifier: GPL-2.0-only
+menuconfig ARCH_OMAP1
+ bool "TI OMAP1"
+ depends on ARCH_MULTI_V4T || ARCH_MULTI_V5
+ depends on CPU_LITTLE_ENDIAN
+ select ARCH_HAS_HOLES_MEMORYMODEL
+ select ARCH_OMAP
+ select CLKSRC_MMIO
+ select FORCE_PCI if PCCARD
+ select GPIOLIB
+ help
+ Support for older TI OMAP1 (omap7xx, omap15xx or omap16xx)
+
if ARCH_OMAP1
menu "TI OMAP1 specific features"
@@ -6,23 +18,27 @@ menu "TI OMAP1 specific features"
comment "OMAP Core Type"
config ARCH_OMAP730
+ depends on ARCH_MULTI_V5
bool "OMAP730 Based System"
select ARCH_OMAP_OTG
select CPU_ARM926T
select OMAP_MPU_TIMER
config ARCH_OMAP850
+ depends on ARCH_MULTI_V5
bool "OMAP850 Based System"
select ARCH_OMAP_OTG
select CPU_ARM926T
config ARCH_OMAP15XX
+ depends on ARCH_MULTI_V4T
default y
bool "OMAP15xx Based System"
select CPU_ARM925T
select OMAP_MPU_TIMER
config ARCH_OMAP16XX
+ depends on ARCH_MULTI_V5
bool "OMAP16xx Based System"
select ARCH_OMAP_OTG
select CPU_ARM926T
diff --git a/arch/arm/mach-omap1/hardware.h b/arch/arm/mach-omap1/hardware.h
index 738becbd2972..c228234a1ed4 100644
--- a/arch/arm/mach-omap1/hardware.h
+++ b/arch/arm/mach-omap1/hardware.h
@@ -64,7 +64,7 @@ static inline u32 omap_cs3_phys(void)
#define OMAP1_IO_OFFSET 0x00f00000 /* Virtual IO = 0xff0b0000 */
#define OMAP1_IO_ADDRESS(pa) IOMEM((pa) - OMAP1_IO_OFFSET)
-#include <mach/serial.h>
+#include "serial.h"
/*
* ---------------------------------------------------------------------------
diff --git a/arch/arm/mach-omap1/include/mach/uncompress.h b/arch/arm/mach-omap1/include/mach/uncompress.h
deleted file mode 100644
index 9cca6a56788f..000000000000
--- a/arch/arm/mach-omap1/include/mach/uncompress.h
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/uncompress.h
- *
- * Serial port stubs for kernel decompress status messages
- *
- * Initially based on:
- * linux-2.4.15-rmk1-dsplinux1.6/arch/arm/plat-omap/include/mach1510/uncompress.h
- * Copyright (C) 2000 RidgeRun, Inc.
- * Author: Greg Lonnon <glonnon at ridgerun.com>
- *
- * Rewritten by:
- * Author: <source at mvista.com>
- * 2004 (c) MontaVista Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <linux/types.h>
-#include <linux/serial_reg.h>
-
-#include <asm/memory.h>
-#include <asm/mach-types.h>
-
-#include "serial.h"
-
-#define MDR1_MODE_MASK 0x07
-
-volatile u8 *uart_base;
-int uart_shift;
-
-/*
- * Store the DEBUG_LL uart number into memory.
- * See also debug-macro.S, and serial.c for related code.
- */
-static void set_omap_uart_info(unsigned char port)
-{
- /*
- * Get address of some.bss variable and round it down
- * a la CONFIG_AUTO_ZRELADDR.
- */
- u32 ram_start = (u32)&uart_shift & 0xf8000000;
- u32 *uart_info = (u32 *)(ram_start + OMAP_UART_INFO_OFS);
- *uart_info = port;
-}
-
-static inline void putc(int c)
-{
- if (!uart_base)
- return;
-
- /* Check for UART 16x mode */
- if ((uart_base[UART_OMAP_MDR1 << uart_shift] & MDR1_MODE_MASK) != 0)
- return;
-
- while (!(uart_base[UART_LSR << uart_shift] & UART_LSR_THRE))
- barrier();
- uart_base[UART_TX << uart_shift] = c;
-}
-
-static inline void flush(void)
-{
-}
-
-/*
- * Macros to configure UART1 and debug UART
- */
-#define _DEBUG_LL_ENTRY(mach, dbg_uart, dbg_shft, dbg_id) \
- if (machine_is_##mach()) { \
- uart_base = (volatile u8 *)(dbg_uart); \
- uart_shift = (dbg_shft); \
- port = (dbg_id); \
- set_omap_uart_info(port); \
- break; \
- }
-
-#define DEBUG_LL_OMAP7XX(p, mach) \
- _DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP7XX_PORT_SHIFT, \
- OMAP1UART##p)
-
-#define DEBUG_LL_OMAP1(p, mach) \
- _DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP_PORT_SHIFT, \
- OMAP1UART##p)
-
-static inline void arch_decomp_setup(void)
-{
- int port = 0;
-
- /*
- * Initialize the port based on the machine ID from the bootloader.
- * Note that we're using macros here instead of switch statement
- * as machine_is functions are optimized out for the boards that
- * are not selected.
- */
- do {
- /* omap7xx/8xx based boards using UART1 with shift 0 */
- DEBUG_LL_OMAP7XX(1, herald);
- DEBUG_LL_OMAP7XX(1, omap_perseus2);
-
- /* omap15xx/16xx based boards using UART1 */
- DEBUG_LL_OMAP1(1, ams_delta);
- DEBUG_LL_OMAP1(1, nokia770);
- DEBUG_LL_OMAP1(1, omap_h2);
- DEBUG_LL_OMAP1(1, omap_h3);
- DEBUG_LL_OMAP1(1, omap_innovator);
- DEBUG_LL_OMAP1(1, omap_osk);
- DEBUG_LL_OMAP1(1, omap_palmte);
- DEBUG_LL_OMAP1(1, omap_palmz71);
-
- /* omap15xx/16xx based boards using UART2 */
- DEBUG_LL_OMAP1(2, omap_palmtt);
-
- /* omap15xx/16xx based boards using UART3 */
- DEBUG_LL_OMAP1(3, sx1);
- } while (0);
-}
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index 299ae1106187..88928fc33b2e 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -19,8 +19,7 @@
#include <asm/mach-types.h>
-#include <mach/serial.h>
-
+#include "serial.h"
#include "mux.h"
#include "pm.h"
#include "soc.h"
diff --git a/arch/arm/mach-omap1/include/mach/serial.h b/arch/arm/mach-omap1/serial.h
similarity index 100%
rename from arch/arm/mach-omap1/include/mach/serial.h
rename to arch/arm/mach-omap1/serial.h
--
2.29.2
More information about the linux-arm-kernel
mailing list