[PATCH v2 3/3] ARM: dts: rockchip: restyle emac nodes

[Johan Jonker]

The emac_rockchip.txt file is converted to YAML.
Phy nodes are now a subnode of mdio, so restyle
the emac nodes of rk3036/rk3066/rk3188.

Signed-off-by: Johan Jonker <jbx6244 at gmail.com>
---

Changed V2:
  use phy
---
 arch/arm/boot/dts/rk3036-evb.dts        | 16 ++++++++++------
 arch/arm/boot/dts/rk3036-kylin.dts      | 16 ++++++++++------
 arch/arm/boot/dts/rk3036.dtsi           |  2 --
 arch/arm/boot/dts/rk3066a-marsboard.dts | 17 ++++++++++-------
 arch/arm/boot/dts/rk3066a-rayeager.dts  | 15 ++++++++++-----
 arch/arm/boot/dts/rk3188-radxarock.dts  | 19 +++++++++++--------
 arch/arm/boot/dts/rk3xxx.dtsi           |  2 --
 7 files changed, 51 insertions(+), 36 deletions(-)

diff --git a/arch/arm/boot/dts/rk3036-evb.dts b/arch/arm/boot/dts/rk3036-evb.dts
index 2a7e6624e..9fd4d9db9 100644
--- a/arch/arm/boot/dts/rk3036-evb.dts
+++ b/arch/arm/boot/dts/rk3036-evb.dts
@@ -15,16 +15,20 @@
 };
 
 &emac {
-	pinctrl-names = "default";
-	pinctrl-0 = <&emac_xfer>, <&emac_mdio>;
 	phy = <&phy0>;
-	phy-reset-gpios = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>; /* PHY_RST */
 	phy-reset-duration = <10>; /* millisecond */
-
+	phy-reset-gpios = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>; /* PHY_RST */
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_xfer>, <&emac_mdio>;
 	status = "okay";
 
-	phy0: ethernet-phy at 0 {
-		reg = <0>;
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy at 0 {
+			reg = <0>;
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/rk3036-kylin.dts b/arch/arm/boot/dts/rk3036-kylin.dts
index e817eba8c..67e1e0413 100644
--- a/arch/arm/boot/dts/rk3036-kylin.dts
+++ b/arch/arm/boot/dts/rk3036-kylin.dts
@@ -80,16 +80,20 @@
 };
 
 &emac {
-	pinctrl-names = "default";
-	pinctrl-0 = <&emac_xfer>, <&emac_mdio>;
 	phy = <&phy0>;
-	phy-reset-gpios = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>; /* PHY_RST */
 	phy-reset-duration = <10>; /* millisecond */
-
+	phy-reset-gpios = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>; /* PHY_RST */
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_xfer>, <&emac_mdio>;
 	status = "okay";
 
-	phy0: ethernet-phy at 0 {
-		reg = <0>;
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy at 0 {
+			reg = <0>;
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi
index e240b89b0..78686fc72 100644
--- a/arch/arm/boot/dts/rk3036.dtsi
+++ b/arch/arm/boot/dts/rk3036.dtsi
@@ -228,8 +228,6 @@
 		compatible = "rockchip,rk3036-emac";
 		reg = <0x10200000 0x4000>;
 		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
 		rockchip,grf = <&grf>;
 		clocks = <&cru HCLK_MAC>, <&cru SCLK_MACREF>, <&cru SCLK_MAC>;
 		clock-names = "hclk", "macref", "macclk";
diff --git a/arch/arm/boot/dts/rk3066a-marsboard.dts b/arch/arm/boot/dts/rk3066a-marsboard.dts
index a66d915aa..8beecd628 100644
--- a/arch/arm/boot/dts/rk3066a-marsboard.dts
+++ b/arch/arm/boot/dts/rk3066a-marsboard.dts
@@ -150,18 +150,21 @@
 #include "tps65910.dtsi"
 
 &emac {
-	status = "okay";
-
 	phy = <&phy0>;
 	phy-supply = <&vcc_rmii>;
-
 	pinctrl-names = "default";
 	pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&phy_int>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-	phy0: ethernet-phy at 0 {
-		reg = <0>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <RK_PD2 IRQ_TYPE_LEVEL_LOW>;
+		phy0: ethernet-phy at 0 {
+			reg = <0>;
+			interrupt-parent = <&gpio1>;
+			interrupts = <RK_PD2 IRQ_TYPE_LEVEL_LOW>;
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/rk3066a-rayeager.dts b/arch/arm/boot/dts/rk3066a-rayeager.dts
index 12b2e59ae..9aeef36ca 100644
--- a/arch/arm/boot/dts/rk3066a-rayeager.dts
+++ b/arch/arm/boot/dts/rk3066a-rayeager.dts
@@ -142,15 +142,20 @@
 };
 
 &emac {
-	pinctrl-names = "default";
-	pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&rmii_rst>;
 	phy = <&phy0>;
 	phy-supply = <&vcc_rmii>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&rmii_rst>;
 	status = "okay";
 
-	phy0: ethernet-phy at 0 {
-		reg = <0>;
-		reset-gpios = <&gpio1 RK_PD6 GPIO_ACTIVE_LOW>;
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy at 0 {
+			reg = <0>;
+			reset-gpios = <&gpio1 RK_PD6 GPIO_ACTIVE_LOW>;
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts
index 36c0945f4..bb0942d3e 100644
--- a/arch/arm/boot/dts/rk3188-radxarock.dts
+++ b/arch/arm/boot/dts/rk3188-radxarock.dts
@@ -126,18 +126,21 @@
 };
 
 &emac {
-	status = "okay";
-
+	phy = <&phy0>;
+	phy-supply = <&vcc_rmii>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&phy_int>;
+	status = "okay";
 
-	phy = <&phy0>;
-	phy-supply = <&vcc_rmii>;
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-	phy0: ethernet-phy at 0 {
-		reg = <0>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <RK_PD2 IRQ_TYPE_LEVEL_LOW>;
+		phy0: ethernet-phy at 0 {
+			reg = <0>;
+			interrupt-parent = <&gpio3>;
+			interrupts = <RK_PD2 IRQ_TYPE_LEVEL_LOW>;
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi
index 616a828e0..bf285091a 100644
--- a/arch/arm/boot/dts/rk3xxx.dtsi
+++ b/arch/arm/boot/dts/rk3xxx.dtsi
@@ -186,8 +186,6 @@
 		compatible = "snps,arc-emac";
 		reg = <0x10204000 0x3c>;
 		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
 
 		rockchip,grf = <&grf>;
 
-- 
2.20.1