[PATCH V2 04/11] ARM: dts: bcm2835/bcm2711: Introduce reg-names in watchdog node

[Stefan Wahren]

From: Nicolas Saenz Julienne <nsaenzjulienne at suse.de>

bcm2835-pm's bindings now support explicitly setting 'reg-names,' so use
them.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne at suse.de>
Signed-off-by: Stefan Wahren <stefan.wahren at i2se.com>
Reviewed-by: Peter Robinson <pbrobinson at gmail.com>
---
 arch/arm/boot/dts/bcm2711.dtsi        | 1 +
 arch/arm/boot/dts/bcm2835-common.dtsi | 1 +
 2 files changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
index 89af57482bc8..cbb47e2c9434 100644
--- a/arch/arm/boot/dts/bcm2711.dtsi
+++ b/arch/arm/boot/dts/bcm2711.dtsi
@@ -113,6 +113,7 @@ pm: watchdog at 7e100000 {
 			reg = <0x7e100000 0x114>,
 			      <0x7e00a000 0x24>,
 			      <0x7ec11000 0x20>;
+			reg-names = "pm", "asb", "rpivid_asb";
 			clocks = <&clocks BCM2835_CLOCK_V3D>,
 				 <&clocks BCM2835_CLOCK_PERI_IMAGE>,
 				 <&clocks BCM2835_CLOCK_H264>,
diff --git a/arch/arm/boot/dts/bcm2835-common.dtsi b/arch/arm/boot/dts/bcm2835-common.dtsi
index c25e797b9060..a037d2bc5b11 100644
--- a/arch/arm/boot/dts/bcm2835-common.dtsi
+++ b/arch/arm/boot/dts/bcm2835-common.dtsi
@@ -62,6 +62,7 @@ pm: watchdog at 7e100000 {
 			#reset-cells = <1>;
 			reg = <0x7e100000 0x114>,
 			      <0x7e00a000 0x24>;
+			reg-names = "pm", "asb";
 			clocks = <&clocks BCM2835_CLOCK_V3D>,
 				 <&clocks BCM2835_CLOCK_PERI_IMAGE>,
 				 <&clocks BCM2835_CLOCK_H264>,
-- 
2.25.1