[PATCH 0/8] Add interconnect for i.MX8MP blk ctrl

[Peng Fan (OSS)]

From: Peng Fan <peng.fan at nxp.com>

i.MX8MP NoC settings is invalid after related power domain up. So
need to set valid values after power domain up.

This patchset is to bind interconnect for each entry in blk ctrl.

This patchset is not include DVFS DDRC feature.

A repo created here: https://github.com/MrVan/linux/tree/imx8mp-interconnect

Peng Fan (8):
  dt-bindings: soc: imx: add interconnect property for i.MX8MP media blk
    ctrl
  dt-bindings: soc: imx: add interconnect property for i.MX8MP hdmi blk
    ctrl
  dt-bindings: soc: imx: add interconnect property for i.MX8MP hsio blk
    ctrl
  soc: imx: add icc paths for i.MX8MP media blk ctrl
  soc: imx: add icc paths for i.MX8MP hsio/hdmi blk ctrl
  arm64: dts: imx8mp: add NoC node
  arm64: dts: imx8mp: add interconnects for media blk ctrl
  arm64: dts: imx8mp: add interconnect for hsio blk ctrl

 .../soc/imx/fsl,imx8mp-hdmi-blk-ctrl.yaml     |  9 +++++
 .../soc/imx/fsl,imx8mp-hsio-blk-ctrl.yaml     | 10 +++++
 .../soc/imx/fsl,imx8mp-media-blk-ctrl.yaml    | 14 +++++++
 arch/arm64/boot/dts/freescale/imx8mp.dtsi     | 39 +++++++++++++++++++
 drivers/soc/imx/imx8m-blk-ctrl.c              | 31 +++++++++++++++
 drivers/soc/imx/imx8mp-blk-ctrl.c             | 32 +++++++++++++++
 6 files changed, 135 insertions(+)

-- 
2.25.1