[PATCH 0/8] interconnect: support i.MX8MP
Peng Fan (OSS)
peng.fan at oss.nxp.com
Wed Jun 1 02:41:48 PDT 2022
From: Peng Fan <peng.fan at nxp.com>
This patchset is to support i.MX8MP NoC settings, i.MX8MP NoC initial
value after power up is invalid, need set a valid value after related
power domain up.
This patchset also includes two patch[1,2] during my development to enable
the ICC feature for i.MX8MP.
I not include ddrc DVFS in this patchset, ths patchset is only to
support NoC value mode/priority/ext_control being set to a valid value
that suggested by i.MX Chip Design Team. The value is same as NXP
downstream one inside Arm Trusted Firmware:
https://source.codeaurora.org/external/imx/imx-atf/tree/plat/imx/imx8m/imx8mp/gpc.c?h=lf_v2.4#n97
A repo created here: https://github.com/MrVan/linux/tree/imx8mp-interconnect
Peng Fan (8):
dt-bindings: interconnect: imx8m: Add bindings for imx8mp noc
interconnect: add device managed bulk API
interconnect: imx: fix max_node_id
interconnect: imx: set src node
interconnect: imx: introduce imx_icc_provider
interconnect: imx: set of_node for interconnect provider
interconnect: imx: configure NoC mode/prioriry/ext_control
interconnect: imx: Add platform driver for imx8mp
.../bindings/interconnect/fsl,imx8m-noc.yaml | 6 +
drivers/interconnect/bulk.c | 34 +++
drivers/interconnect/imx/Kconfig | 4 +
drivers/interconnect/imx/Makefile | 2 +
drivers/interconnect/imx/imx.c | 68 +++--
drivers/interconnect/imx/imx.h | 25 +-
drivers/interconnect/imx/imx8mm.c | 2 +-
drivers/interconnect/imx/imx8mn.c | 2 +-
drivers/interconnect/imx/imx8mp.c | 232 ++++++++++++++++++
drivers/interconnect/imx/imx8mq.c | 2 +-
include/dt-bindings/interconnect/fsl,imx8mp.h | 59 +++++
include/linux/interconnect.h | 6 +
12 files changed, 424 insertions(+), 18 deletions(-)
create mode 100644 drivers/interconnect/imx/imx8mp.c
create mode 100644 include/dt-bindings/interconnect/fsl,imx8mp.h
--
2.25.1
More information about the linux-arm-kernel
mailing list