[RFC PATCH 14/16] firmware: arm_scmi: Add testing Voltage protocol support
Arun KS
arunks.linux at gmail.com
Sun Jul 31 21:47:00 PDT 2022
Hi Cristian,
On Mon, Feb 28, 2022 at 4:23 AM Cristian Marussi
<cristian.marussi at arm.com> wrote:
>
> firmware: arm_scmi: Add testing Voltage protocol support
>
> Signed-off-by: Cristian Marussi <cristian.marussi at arm.com>
> ---
> .../arm_scmi/scmi_test_driver/Makefile | 2 +-
> .../arm_scmi/scmi_test_driver/scmi_test.c | 2 +
> .../arm_scmi/scmi_test_driver/test_common.h | 1 +
> .../arm_scmi/scmi_test_driver/test_voltages.c | 51 +++++++++++++++++++
> 4 files changed, 55 insertions(+), 1 deletion(-)
> create mode 100644 drivers/firmware/arm_scmi/scmi_test_driver/test_voltages.c
>
> diff --git a/drivers/firmware/arm_scmi/scmi_test_driver/Makefile b/drivers/firmware/arm_scmi/scmi_test_driver/Makefile
> index 68a3d94a6a88..3b7df18de250 100644
> --- a/drivers/firmware/arm_scmi/scmi_test_driver/Makefile
> +++ b/drivers/firmware/arm_scmi/scmi_test_driver/Makefile
> @@ -1,5 +1,5 @@
> # SPDX-License-Identifier: GPL-2.0-only
> scmi_test_driver-objs := scmi_test.o test_common.o test_clocks.o test_sensors.o \
> - test_powers.o
> + test_powers.o test_voltages.o
> obj-$(CONFIG_ARM_SCMI_TEST_DRIVER) += scmi_test_driver.o
>
> diff --git a/drivers/firmware/arm_scmi/scmi_test_driver/scmi_test.c b/drivers/firmware/arm_scmi/scmi_test_driver/scmi_test.c
> index df0d3e572010..2ca9f82c5bf3 100644
> --- a/drivers/firmware/arm_scmi/scmi_test_driver/scmi_test.c
> +++ b/drivers/firmware/arm_scmi/scmi_test_driver/scmi_test.c
> @@ -26,6 +26,7 @@ int (*scmi_test_init[SCMI_MAX_PROTOCOLS])(struct scmi_test_setup *) = {
> [SCMI_PROTOCOL_POWER] = scmi_test_power_init,
> [SCMI_PROTOCOL_CLOCK] = scmi_test_clock_init,
> [SCMI_PROTOCOL_SENSOR] = scmi_test_sensor_init,
> + [SCMI_PROTOCOL_VOLTAGE] = scmi_test_voltage_init,
> };
>
> static void
> @@ -125,6 +126,7 @@ static int scmi_testing_probe(struct scmi_device *sdev)
> }
>
> static const struct scmi_device_id scmi_id_table[] = {
> + { SCMI_PROTOCOL_VOLTAGE, "__scmi_test-voltage" },
> { SCMI_PROTOCOL_CLOCK, "__scmi_test-clock" },
> { SCMI_PROTOCOL_SENSOR, "__scmi_test-sensor" },
> { SCMI_PROTOCOL_POWER, "__scmi_test-power" },
> diff --git a/drivers/firmware/arm_scmi/scmi_test_driver/test_common.h b/drivers/firmware/arm_scmi/scmi_test_driver/test_common.h
> index 9f3d35ba4477..338b65da593f 100644
> --- a/drivers/firmware/arm_scmi/scmi_test_driver/test_common.h
> +++ b/drivers/firmware/arm_scmi/scmi_test_driver/test_common.h
> @@ -102,6 +102,7 @@ int scmi_test_release(struct inode *ino, struct file *filp);
>
> int scmi_test_clock_init(struct scmi_test_setup *tsp);
> int scmi_test_sensor_init(struct scmi_test_setup *tsp);
> +int scmi_test_voltage_init(struct scmi_test_setup *tsp);
> int scmi_test_power_init(struct scmi_test_setup *tsp);
>
> #endif /* __SCMI_TEST_COMMON_H */
> diff --git a/drivers/firmware/arm_scmi/scmi_test_driver/test_voltages.c b/drivers/firmware/arm_scmi/scmi_test_driver/test_voltages.c
> new file mode 100644
> index 000000000000..ab91080e3a0f
> --- /dev/null
> +++ b/drivers/firmware/arm_scmi/scmi_test_driver/test_voltages.c
> @@ -0,0 +1,51 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * SCMI Testing Driver - Voltage Protocol
> + *
> + * Copyright (C) 2022 ARM Ltd.
> + */
> +
> +#include <linux/dcache.h>
> +#include <linux/debugfs.h>
> +#include <linux/err.h>
> +#include <linux/fs.h>
> +#include <linux/io.h>
> +#include <linux/kstrtox.h>
> +#include <linux/module.h>
> +#include <linux/scmi_protocol.h>
> +#include <linux/slab.h>
> +
> +#include "test_common.h"
> +
> +struct scmi_voltage_data {
> + unsigned int version;
> + int count;
> +};
> +
> +int scmi_test_voltage_init(struct scmi_test_setup *tsp)
> +{
> + struct scmi_voltage_data *vdata;
> + struct device *dev = &tsp->sdev->dev;
> + const struct scmi_voltage_proto_ops *voltage_ops;
> +
> + vdata = devm_kzalloc(dev, sizeof(*vdata), GFP_KERNEL);
> + if (!vdata)
> + return -ENOMEM;
> +
> + voltage_ops = tsp->ops;
> + vdata->version = voltage_ops->version_get(tsp->ph);
> + vdata->count = voltage_ops->num_domains_get(tsp->ph);
> +
> + if (vdata->count <= 0) {
> + dev_err(dev, "number of voltage doms invalid: %d\n",
> + vdata->count);
> + return vdata->count ?: -EINVAL;
> + }
> +
> + dev_info(dev, "Found %d voltage resources.\n", vdata->count);
> +
> + tsp->priv = vdata;
> + debugfs_create_x32("version", 0400, tsp->parent, &vdata->version);
Any particular reason, why we are not creating debugfs entires for
regulator level_get/level_set like it was done for
clocks(rate_get_set)?
> +
> + return 0;
> +}
> --
> 2.17.1
>
More information about the linux-arm-kernel
mailing list