[PATCH V4 3/3] arm64: dts: imx8ulp-evk: Add the fec support

[Wei Fang]

Hi
	Kindly Ping.

> -----Original Message-----
> From: Wei Fang
> Sent: 2022年7月26日 14:46
> To: davem at davemloft.net; edumazet at google.com; kuba at kernel.org;
> pabeni at redhat.com; robh+dt at kernel.org; krzysztof.kozlowski+dt at linaro.org;
> shawnguo at kernel.org; s.hauer at pengutronix.de
> Cc: netdev at vger.kernel.org; devicetree at vger.kernel.org;
> linux-kernel at vger.kernel.org; kernel at pengutronix.de; festevam at gmail.com;
> dl-linux-imx <linux-imx at nxp.com>; Peng Fan <peng.fan at nxp.com>; Jacky Bai
> <ping.bai at nxp.com>; sudeep.holla at arm.com;
> linux-arm-kernel at lists.infradead.org; Aisheng Dong <aisheng.dong at nxp.com>
> Subject: [PATCH V4 3/3] arm64: dts: imx8ulp-evk: Add the fec support
> 
> From: Wei Fang <wei.fang at nxp.com>
> 
> Enable the fec on i.MX8ULP EVK board.
> 
> Signed-off-by: Wei Fang <wei.fang at nxp.com>
> ---
> V2 change:
> Add clock_ext_rmii and clock_ext_ts. They are both related to EVK board.
> V3 change:
> No change.
> V4 change:
> Add ethernet-phy address "@1".
> ---
>  arch/arm64/boot/dts/freescale/imx8ulp-evk.dts | 57
> +++++++++++++++++++
>  1 file changed, 57 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts
> b/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts
> index 33e84c4e9ed8..f1c6d933a17c 100644
> --- a/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts
> @@ -19,6 +19,21 @@ memory at 80000000 {
>  		device_type = "memory";
>  		reg = <0x0 0x80000000 0 0x80000000>;
>  	};
> +
> +	clock_ext_rmii: clock-ext-rmii {
> +		compatible = "fixed-clock";
> +		clock-frequency = <50000000>;
> +		clock-output-names = "ext_rmii_clk";
> +		#clock-cells = <0>;
> +	};
> +
> +	clock_ext_ts: clock-ext-ts {
> +		compatible = "fixed-clock";
> +		/* External ts clock is 50MHZ from PHY on EVK board. */
> +		clock-frequency = <50000000>;
> +		clock-output-names = "ext_ts_clk";
> +		#clock-cells = <0>;
> +	};
>  };
> 
>  &lpuart5 {
> @@ -38,7 +53,49 @@ &usdhc0 {
>  	status = "okay";
>  };
> 
> +&fec {
> +	pinctrl-names = "default", "sleep";
> +	pinctrl-0 = <&pinctrl_enet>;
> +	pinctrl-1 = <&pinctrl_enet>;
> +	clocks = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>,
> +		 <&pcc4 IMX8ULP_CLK_ENET>,
> +		 <&cgc1 IMX8ULP_CLK_ENET_TS_SEL>,
> +		 <&clock_ext_rmii>;
> +	clock-names = "ipg", "ahb", "ptp", "enet_clk_ref";
> +	assigned-clocks = <&cgc1 IMX8ULP_CLK_ENET_TS_SEL>;
> +	assigned-clock-parents = <&clock_ext_ts>;
> +	phy-mode = "rmii";
> +	phy-handle = <&ethphy>;
> +	status = "okay";
> +
> +	mdio {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		ethphy: ethernet-phy at 1 {
> +			reg = <1>;
> +			micrel,led-mode = <1>;
> +		};
> +	};
> +};
> +
>  &iomuxc1 {
> +	pinctrl_enet: enetgrp {
> +		fsl,pins = <
> +			MX8ULP_PAD_PTE15__ENET0_MDC     0x43
> +			MX8ULP_PAD_PTE14__ENET0_MDIO    0x43
> +			MX8ULP_PAD_PTE17__ENET0_RXER    0x43
> +			MX8ULP_PAD_PTE18__ENET0_CRS_DV  0x43
> +			MX8ULP_PAD_PTF1__ENET0_RXD0     0x43
> +			MX8ULP_PAD_PTE20__ENET0_RXD1    0x43
> +			MX8ULP_PAD_PTE16__ENET0_TXEN    0x43
> +			MX8ULP_PAD_PTE23__ENET0_TXD0    0x43
> +			MX8ULP_PAD_PTE22__ENET0_TXD1    0x43
> +			MX8ULP_PAD_PTE19__ENET0_REFCLK  0x43
> +			MX8ULP_PAD_PTF10__ENET0_1588_CLKIN 0x43
> +		>;
> +	};
> +
>  	pinctrl_lpuart5: lpuart5grp {
>  		fsl,pins = <
>  			MX8ULP_PAD_PTF14__LPUART5_TX	0x3
> --
> 2.25.1