[PATCH v2 30/32] thermal/drivers/samsung: Switch to new of thermal API
Daniel Lezcano
daniel.lezcano at linexp.org
Mon Jul 25 14:26:35 PDT 2022
The thermal OF code has a new API allowing to migrate the OF
initialization to a simpler approach. The ops are no longer device
tree specific and are the generic ones provided by the core code.
Convert the ops to the thermal_zone_device_ops format and use the new
API to register the thermal zone with these generic ops.
Signed-off-by: Daniel Lezcano <daniel.lezcano at linexp.org>
---
drivers/thermal/samsung/exynos_tmu.c | 24 ++++++++++--------------
1 file changed, 10 insertions(+), 14 deletions(-)
diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
index f4ab4c5b4b62..5b1a8a1e193d 100644
--- a/drivers/thermal/samsung/exynos_tmu.c
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -650,9 +650,9 @@ static void exynos7_tmu_control(struct platform_device *pdev, bool on)
writel(con, data->base + EXYNOS_TMU_REG_CONTROL);
}
-static int exynos_get_temp(void *p, int *temp)
+static int exynos_get_temp(struct thermal_zone_device *tz, int *temp)
{
- struct exynos_tmu_data *data = p;
+ struct exynos_tmu_data *data = tz->devdata;
int value, ret = 0;
if (!data || !data->tmu_read)
@@ -728,9 +728,9 @@ static void exynos4412_tmu_set_emulation(struct exynos_tmu_data *data,
writel(val, data->base + emul_con);
}
-static int exynos_tmu_set_emulation(void *drv_data, int temp)
+static int exynos_tmu_set_emulation(struct thermal_zone_device *tz, int temp)
{
- struct exynos_tmu_data *data = drv_data;
+ struct exynos_tmu_data *data = tz->devdata;
int ret = -EINVAL;
if (data->soc == SOC_ARCH_EXYNOS4210)
@@ -750,7 +750,7 @@ static int exynos_tmu_set_emulation(void *drv_data, int temp)
}
#else
#define exynos4412_tmu_set_emulation NULL
-static int exynos_tmu_set_emulation(void *drv_data, int temp)
+static int exynos_tmu_set_emulation(struct thermal_zone *tz, int temp)
{ return -EINVAL; }
#endif /* CONFIG_THERMAL_EMULATION */
@@ -997,7 +997,7 @@ static int exynos_map_dt_data(struct platform_device *pdev)
return 0;
}
-static const struct thermal_zone_of_device_ops exynos_sensor_ops = {
+static const struct thermal_zone_device_ops exynos_sensor_ops = {
.get_temp = exynos_get_temp,
.set_emul_temp = exynos_tmu_set_emulation,
};
@@ -1091,8 +1091,8 @@ static int exynos_tmu_probe(struct platform_device *pdev)
* data->tzd must be registered before calling exynos_tmu_initialize(),
* requesting irq and calling exynos_tmu_control().
*/
- data->tzd = thermal_zone_of_sensor_register(&pdev->dev, 0, data,
- &exynos_sensor_ops);
+ data->tzd = devm_thermal_of_zone_register(&pdev->dev, 0, data,
+ &exynos_sensor_ops);
if (IS_ERR(data->tzd)) {
ret = PTR_ERR(data->tzd);
if (ret != -EPROBE_DEFER)
@@ -1104,21 +1104,19 @@ static int exynos_tmu_probe(struct platform_device *pdev)
ret = exynos_tmu_initialize(pdev);
if (ret) {
dev_err(&pdev->dev, "Failed to initialize TMU\n");
- goto err_thermal;
+ goto err_sclk;
}
ret = devm_request_irq(&pdev->dev, data->irq, exynos_tmu_irq,
IRQF_TRIGGER_RISING | IRQF_SHARED, dev_name(&pdev->dev), data);
if (ret) {
dev_err(&pdev->dev, "Failed to request irq: %d\n", data->irq);
- goto err_thermal;
+ goto err_sclk;
}
exynos_tmu_control(pdev, true);
return 0;
-err_thermal:
- thermal_zone_of_sensor_unregister(&pdev->dev, data->tzd);
err_sclk:
clk_disable_unprepare(data->sclk);
err_clk:
@@ -1136,9 +1134,7 @@ static int exynos_tmu_probe(struct platform_device *pdev)
static int exynos_tmu_remove(struct platform_device *pdev)
{
struct exynos_tmu_data *data = platform_get_drvdata(pdev);
- struct thermal_zone_device *tzd = data->tzd;
- thermal_zone_of_sensor_unregister(&pdev->dev, tzd);
exynos_tmu_control(pdev, false);
clk_disable_unprepare(data->sclk);
--
2.25.1
More information about the linux-arm-kernel
mailing list