[PATCH v2 3/4] thermal: mediatek: control buffer enablement tweaks

Amjad Ouled-Ameur aouledameur at baylibre.com
Wed Jul 20 11:18:53 PDT 2022


From: Markus Schneider-Pargmann <msp at baylibre.com>

Add logic in order to be able to turn on the control buffer on MT8365.
This change now allows to have control buffer support for MTK_THERMAL_V1,
and it allows to define the register offset, and mask used to enable it.

Signed-off-by: Markus Schneider-Pargmann <msp at baylibre.com>
Signed-off-by: Fabien Parent <fparent at baylibre.com>
Reviewed-by: Amjad Ouled-Ameur <aouledameur at baylibre.com>
Tested-by: Amjad Ouled-Ameur <aouledameur at baylibre.com>
---
 drivers/thermal/mtk_thermal.c | 23 +++++++++++++++++------
 1 file changed, 17 insertions(+), 6 deletions(-)

diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mtk_thermal.c
index 216eb0d61c5b..1dc276f8c4f1 100644
--- a/drivers/thermal/mtk_thermal.c
+++ b/drivers/thermal/mtk_thermal.c
@@ -283,6 +283,9 @@ struct mtk_thermal_data {
 	bool need_switch_bank;
 	struct thermal_bank_cfg bank_data[MAX_NUM_ZONES];
 	enum mtk_thermal_version version;
+	u32 apmixed_buffer_ctl_reg;
+	u32 apmixed_buffer_ctl_mask;
+	u32 apmixed_buffer_ctl_set;
 };
 
 struct mtk_thermal {
@@ -578,6 +581,9 @@ static const struct mtk_thermal_data mt7622_thermal_data = {
 	.adcpnp = mt7622_adcpnp,
 	.sensor_mux_values = mt7622_mux_values,
 	.version = MTK_THERMAL_V2,
+	.apmixed_buffer_ctl_reg = APMIXED_SYS_TS_CON1,
+	.apmixed_buffer_ctl_mask = ~0x37,
+	.apmixed_buffer_ctl_set = 0x1,
 };
 
 /*
@@ -1031,14 +1037,18 @@ static const struct of_device_id mtk_thermal_of_match[] = {
 };
 MODULE_DEVICE_TABLE(of, mtk_thermal_of_match);
 
-static void mtk_thermal_turn_on_buffer(void __iomem *apmixed_base)
+static void mtk_thermal_turn_on_buffer(struct mtk_thermal *mt,
+				       void __iomem *apmixed_base)
 {
 	int tmp;
 
-	tmp = readl(apmixed_base + APMIXED_SYS_TS_CON1);
-	tmp &= ~(0x37);
-	tmp |= 0x1;
-	writel(tmp, apmixed_base + APMIXED_SYS_TS_CON1);
+	if (!mt->conf->apmixed_buffer_ctl_reg)
+		return;
+
+	tmp = readl(apmixed_base + mt->conf->apmixed_buffer_ctl_reg);
+	tmp &= mt->conf->apmixed_buffer_ctl_mask;
+	tmp |= mt->conf->apmixed_buffer_ctl_set;
+	writel(tmp, apmixed_base + mt->conf->apmixed_buffer_ctl_reg);
 	udelay(200);
 }
 
@@ -1138,8 +1148,9 @@ static int mtk_thermal_probe(struct platform_device *pdev)
 		goto err_disable_clk_auxadc;
 	}
 
+	mtk_thermal_turn_on_buffer(mt, apmixed_base);
+
 	if (mt->conf->version == MTK_THERMAL_V2) {
-		mtk_thermal_turn_on_buffer(apmixed_base);
 		mtk_thermal_release_periodic_ts(mt, auxadc_base);
 	}
 
-- 
2.37.1




More information about the linux-arm-kernel mailing list