[PATCH v2 1/3] dt-bindings: PCI: imx6: convert the imx pcie controller to dtschema

[Hongxing Zhu]

> -----Original Message-----
> From: Bjorn Helgaas <helgaas at kernel.org>
> Sent: 2022年7月20日 2:00
> To: Hongxing Zhu <hongxing.zhu at nxp.com>
> Cc: robh at kernel.org; l.stach at pengutronix.de; galak at kernel.crashing.org;
> shawnguo at kernel.org; devicetree at vger.kernel.org;
> linux-arm-kernel at lists.infradead.org; linux-kernel at vger.kernel.org;
> dl-linux-imx <linux-imx at nxp.com>; kernel at pengutronix.de
> Subject: Re: [PATCH v2 1/3] dt-bindings: PCI: imx6: convert the imx pcie
> controller to dtschema
> 
> On Fri, Aug 27, 2021 at 02:42:58PM +0800, Richard Zhu wrote:
> > Convert the fsl,imx6q-pcie.txt into a schema.
> > - ranges property should be grouped by region, with no functional
> >   changes.
> > - only one propert is allowed in the compatible string, remove
> >   "snps,dw-pcie".
> >
> > Signed-off-by: Richard Zhu <hongxing.zhu at nxp.com>
> > ---
> >  .../bindings/pci/fsl,imx6q-pcie.txt           | 100 ---------
> >  .../bindings/pci/fsl,imx6q-pcie.yaml          | 202
> ++++++++++++++++++
> >  MAINTAINERS                                   |   2 +-
> >  3 files changed, 203 insertions(+), 101 deletions(-)  delete mode
> > 100644 Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
> >  create mode 100644
> > Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
> > b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
> 
> > -Optional properties:
> > -- fsl,tx-deemph-gen1: Gen1 De-emphasis value. Default: 0
> > -- fsl,tx-deemph-gen2-3p5db: Gen2 (3.5db) De-emphasis value. Default:
> > 0
> 
> > diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
> > b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
> 
> > +  fsl,tx-deemph-gen1:
> > +    description: Gen1 De-emphasis value (optional required).
> > +    $ref: /schemas/types.yaml#/definitions/uint32
> > +    default: 0
> > +
> > +  fsl,tx-deemph-gen2-3p5db:
> > +    description: Gen2 (3.5db) De-emphasis value (optional required).
> > +    $ref: /schemas/types.yaml#/definitions/uint32
> > +    default: 0
> 
> What does "optional required" mean in all these properties?
> "Optional" is the opposite of "required."
Hi Bjorn:
Regarding my understands, the "optional required" means that these properties
 are not mandatory required. The default values are used if there are no such
 kind of properties. If HW board designers want to shape their PCIe signals
 (E.X eye diagram), they should define these properties.

Best Regards
Richard Zhu