[PATCH RFC v2 0/6] net: dsa: always use phylink
Marcin Wojtas
mw at semihalf.com
Fri Jul 15 01:30:37 PDT 2022
Hi,
śr., 13 lip 2022 o 16:16 Russell King (Oracle) <linux at armlinux.org.uk>
napisał(a):
>
> Hi,
>
> This is a re-hash of the previous RFC series, this time using the
> suggestion from Vladimir to create a swnode based fixed-link
> specifier.
>
> Most of the changes are to DSA and phylink code from the previous
> series. I've tested on my Clearfog (which has just one Marvell DSA
> switch) and it works there - also tested without the fixed-link
> specified in DT.
>
> drivers/base/swnode.c | 14 ++-
> drivers/net/dsa/b53/b53_common.c | 3 +-
> drivers/net/dsa/bcm_sf2.c | 3 +-
> drivers/net/dsa/hirschmann/hellcreek.c | 3 +-
> drivers/net/dsa/lantiq_gswip.c | 6 +-
> drivers/net/dsa/microchip/ksz_common.c | 3 +-
> drivers/net/dsa/mt7530.c | 3 +-
> drivers/net/dsa/mv88e6xxx/chip.c | 134 ++++++++++++-------------
> drivers/net/dsa/mv88e6xxx/chip.h | 6 +-
> drivers/net/dsa/mv88e6xxx/port.c | 32 ------
> drivers/net/dsa/mv88e6xxx/port.h | 5 -
> drivers/net/dsa/ocelot/felix.c | 3 +-
> drivers/net/dsa/qca/ar9331.c | 3 +-
> drivers/net/dsa/qca8k.c | 3 +-
> drivers/net/dsa/realtek/rtl8365mb.c | 3 +-
> drivers/net/dsa/sja1105/sja1105_main.c | 3 +-
> drivers/net/dsa/xrs700x/xrs700x.c | 3 +-
> drivers/net/phy/phylink.c | 30 ++++--
> include/linux/phylink.h | 1 +
> include/linux/property.h | 4 +
> include/net/dsa.h | 3 +-
> net/dsa/port.c | 175 +++++++++++++++++++++++++++++----
> 22 files changed, 290 insertions(+), 153 deletions(-)
>
I tested the patchset on top of net-next/master alone and with my
fwnode_/ACPI patchset:
* On EspressoBIN
* On SolidRun CN913x CEx7 Eval Board
- with DT (with and without fixed-link description in CPU port)
- with ACPI (with and without fixed-link description in CPU port)
All works as expected, so:
Tested-by: Marcin Wojtas <mw at semihalf.com>
FWIW, the patches LGTM:
Reviewed-by: Marcin Wojtas <mw at semihalf.com>
Best regards,
Marcin
More information about the linux-arm-kernel
mailing list