[PATCH RFC net-next v2 4/6] net: dsa: mv88e6xxx: report the default interface mode for the port
Russell King (Oracle)
rmk+kernel at armlinux.org.uk
Wed Jul 13 07:07:57 PDT 2022
Report the maximum speed interface mode for the port, or if we don't
have that information, the hardware configured interface mode for
the port.
This allows phylink to know which interface mode CPU and DSA ports
are operating, which will be necessary when we want to select the
maximum speed for the port (required for such ports without a PHY or
fixed-link specified in firmware.)
Reviewed-by: Marek Behún <kabel at kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel at armlinux.org.uk>
---
drivers/net/dsa/mv88e6xxx/chip.c | 82 +++++++++++++++++++++++---------
drivers/net/dsa/mv88e6xxx/chip.h | 3 +-
2 files changed, 61 insertions(+), 24 deletions(-)
diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index f98be98551ef..ccb35ea5d7b0 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -578,7 +578,8 @@ static const u8 mv88e6185_phy_interface_modes[] = {
};
static void mv88e6095_phylink_get_caps(struct mv88e6xxx_chip *chip, int port,
- struct phylink_config *config)
+ struct phylink_config *config,
+ phy_interface_t *default_interface)
{
u8 cmode = chip->ports[port].cmode;
@@ -588,23 +589,29 @@ static void mv88e6095_phylink_get_caps(struct mv88e6xxx_chip *chip, int port,
__set_bit(PHY_INTERFACE_MODE_MII, config->supported_interfaces);
} else {
if (cmode < ARRAY_SIZE(mv88e6185_phy_interface_modes) &&
- mv88e6185_phy_interface_modes[cmode])
+ mv88e6185_phy_interface_modes[cmode]) {
__set_bit(mv88e6185_phy_interface_modes[cmode],
config->supported_interfaces);
+ *default_interface =
+ mv88e6185_phy_interface_modes[cmode];
+ }
config->mac_capabilities |= MAC_1000FD;
}
}
static void mv88e6185_phylink_get_caps(struct mv88e6xxx_chip *chip, int port,
- struct phylink_config *config)
+ struct phylink_config *config,
+ phy_interface_t *default_interface)
{
u8 cmode = chip->ports[port].cmode;
if (cmode < ARRAY_SIZE(mv88e6185_phy_interface_modes) &&
- mv88e6185_phy_interface_modes[cmode])
+ mv88e6185_phy_interface_modes[cmode]) {
__set_bit(mv88e6185_phy_interface_modes[cmode],
config->supported_interfaces);
+ *default_interface = mv88e6185_phy_interface_modes[cmode];
+ }
config->mac_capabilities = MAC_SYM_PAUSE | MAC_10 | MAC_100 |
MAC_1000FD;
@@ -616,6 +623,7 @@ static const u8 mv88e6xxx_phy_interface_modes[] = {
[MV88E6XXX_PORT_STS_CMODE_GMII] = PHY_INTERFACE_MODE_GMII,
[MV88E6XXX_PORT_STS_CMODE_RMII_PHY] = PHY_INTERFACE_MODE_RMII,
[MV88E6XXX_PORT_STS_CMODE_RMII] = PHY_INTERFACE_MODE_RMII,
+ [MV88E6XXX_PORT_STS_CMODE_RGMII] = PHY_INTERFACE_MODE_RGMII,
[MV88E6XXX_PORT_STS_CMODE_100BASEX] = PHY_INTERFACE_MODE_100BASEX,
[MV88E6XXX_PORT_STS_CMODE_1000BASEX] = PHY_INTERFACE_MODE_1000BASEX,
[MV88E6XXX_PORT_STS_CMODE_SGMII] = PHY_INTERFACE_MODE_SGMII,
@@ -625,22 +633,32 @@ static const u8 mv88e6xxx_phy_interface_modes[] = {
*/
};
-static void mv88e6xxx_translate_cmode(u8 cmode, unsigned long *supported)
+static void mv88e6xxx_translate_cmode(u8 cmode, unsigned long *supported,
+ phy_interface_t *default_interface)
{
+ phy_interface_t interface;
+
if (cmode < ARRAY_SIZE(mv88e6xxx_phy_interface_modes) &&
- mv88e6xxx_phy_interface_modes[cmode])
- __set_bit(mv88e6xxx_phy_interface_modes[cmode], supported);
- else if (cmode == MV88E6XXX_PORT_STS_CMODE_RGMII)
- phy_interface_set_rgmii(supported);
+ mv88e6xxx_phy_interface_modes[cmode]) {
+ interface = mv88e6xxx_phy_interface_modes[cmode];
+ if (interface == PHY_INTERFACE_MODE_RGMII)
+ phy_interface_set_rgmii(supported);
+ else
+ __set_bit(interface, supported);
+ if (default_interface)
+ *default_interface = interface;
+ }
}
static void mv88e6250_phylink_get_caps(struct mv88e6xxx_chip *chip, int port,
- struct phylink_config *config)
+ struct phylink_config *config,
+ phy_interface_t *default_interface)
{
unsigned long *supported = config->supported_interfaces;
/* Translate the default cmode */
- mv88e6xxx_translate_cmode(chip->ports[port].cmode, supported);
+ mv88e6xxx_translate_cmode(chip->ports[port].cmode, supported,
+ default_interface);
config->mac_capabilities = MAC_SYM_PAUSE | MAC_10 | MAC_100;
}
@@ -676,13 +694,15 @@ static int mv88e6352_get_port4_serdes_cmode(struct mv88e6xxx_chip *chip)
}
static void mv88e6352_phylink_get_caps(struct mv88e6xxx_chip *chip, int port,
- struct phylink_config *config)
+ struct phylink_config *config,
+ phy_interface_t *default_interface)
{
unsigned long *supported = config->supported_interfaces;
int err, cmode;
/* Translate the default cmode */
- mv88e6xxx_translate_cmode(chip->ports[port].cmode, supported);
+ mv88e6xxx_translate_cmode(chip->ports[port].cmode, supported,
+ default_interface);
config->mac_capabilities = MAC_SYM_PAUSE | MAC_10 | MAC_100 |
MAC_1000FD;
@@ -702,19 +722,21 @@ static void mv88e6352_phylink_get_caps(struct mv88e6xxx_chip *chip, int port,
dev_err(chip->dev, "p%d: failed to read serdes cmode\n",
port);
else
- mv88e6xxx_translate_cmode(cmode, supported);
+ mv88e6xxx_translate_cmode(cmode, supported, NULL);
unlock:
mv88e6xxx_reg_unlock(chip);
}
}
static void mv88e6341_phylink_get_caps(struct mv88e6xxx_chip *chip, int port,
- struct phylink_config *config)
+ struct phylink_config *config,
+ phy_interface_t *default_interface)
{
unsigned long *supported = config->supported_interfaces;
/* Translate the default cmode */
- mv88e6xxx_translate_cmode(chip->ports[port].cmode, supported);
+ mv88e6xxx_translate_cmode(chip->ports[port].cmode, supported,
+ default_interface);
/* No ethtool bits for 200Mbps */
config->mac_capabilities = MAC_SYM_PAUSE | MAC_10 | MAC_100 |
@@ -726,17 +748,21 @@ static void mv88e6341_phylink_get_caps(struct mv88e6xxx_chip *chip, int port,
__set_bit(PHY_INTERFACE_MODE_1000BASEX, supported);
__set_bit(PHY_INTERFACE_MODE_2500BASEX, supported);
+ *default_interface = PHY_INTERFACE_MODE_2500BASEX;
+
config->mac_capabilities |= MAC_2500FD;
}
}
static void mv88e6390_phylink_get_caps(struct mv88e6xxx_chip *chip, int port,
- struct phylink_config *config)
+ struct phylink_config *config,
+ phy_interface_t *default_interface)
{
unsigned long *supported = config->supported_interfaces;
/* Translate the default cmode */
- mv88e6xxx_translate_cmode(chip->ports[port].cmode, supported);
+ mv88e6xxx_translate_cmode(chip->ports[port].cmode, supported,
+ default_interface);
/* No ethtool bits for 200Mbps */
config->mac_capabilities = MAC_SYM_PAUSE | MAC_10 | MAC_100 |
@@ -748,16 +774,19 @@ static void mv88e6390_phylink_get_caps(struct mv88e6xxx_chip *chip, int port,
__set_bit(PHY_INTERFACE_MODE_1000BASEX, supported);
__set_bit(PHY_INTERFACE_MODE_2500BASEX, supported);
+ *default_interface = PHY_INTERFACE_MODE_2500BASEX;
+
config->mac_capabilities |= MAC_2500FD;
}
}
static void mv88e6390x_phylink_get_caps(struct mv88e6xxx_chip *chip, int port,
- struct phylink_config *config)
+ struct phylink_config *config,
+ phy_interface_t *default_interface)
{
unsigned long *supported = config->supported_interfaces;
- mv88e6390_phylink_get_caps(chip, port, config);
+ mv88e6390_phylink_get_caps(chip, port, config, default_interface);
/* For the 6x90X, ports 2-7 can be in automedia mode.
* (Note that 6x90 doesn't support RXAUI nor XAUI).
@@ -783,18 +812,22 @@ static void mv88e6390x_phylink_get_caps(struct mv88e6xxx_chip *chip, int port,
__set_bit(PHY_INTERFACE_MODE_XAUI, supported);
__set_bit(PHY_INTERFACE_MODE_RXAUI, supported);
+ *default_interface = PHY_INTERFACE_MODE_XAUI;
+
config->mac_capabilities |= MAC_10000FD;
}
}
static void mv88e6393x_phylink_get_caps(struct mv88e6xxx_chip *chip, int port,
- struct phylink_config *config)
+ struct phylink_config *config,
+ phy_interface_t *default_interface)
{
unsigned long *supported = config->supported_interfaces;
bool is_6191x =
chip->info->prod_num == MV88E6XXX_PORT_SWITCH_ID_PROD_6191X;
- mv88e6xxx_translate_cmode(chip->ports[port].cmode, supported);
+ mv88e6xxx_translate_cmode(chip->ports[port].cmode, supported,
+ default_interface);
config->mac_capabilities = MAC_SYM_PAUSE | MAC_10 | MAC_100 |
MAC_1000FD;
@@ -812,6 +845,8 @@ static void mv88e6393x_phylink_get_caps(struct mv88e6xxx_chip *chip, int port,
/* FIXME: USXGMII is not supported yet */
/* __set_bit(PHY_INTERFACE_MODE_USXGMII, supported); */
+ *default_interface = PHY_INTERFACE_MODE_10GBASER;
+
config->mac_capabilities |= MAC_2500FD | MAC_5000FD |
MAC_10000FD;
}
@@ -824,7 +859,8 @@ static void mv88e6xxx_get_caps(struct dsa_switch *ds, int port,
{
struct mv88e6xxx_chip *chip = ds->priv;
- chip->info->ops->phylink_get_caps(chip, port, config);
+ chip->info->ops->phylink_get_caps(chip, port, config,
+ default_interface);
/* Internal ports need GMII for PHYLIB */
if (mv88e6xxx_phy_is_internal(ds, port))
diff --git a/drivers/net/dsa/mv88e6xxx/chip.h b/drivers/net/dsa/mv88e6xxx/chip.h
index e693154cf803..4518c17c1b9b 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.h
+++ b/drivers/net/dsa/mv88e6xxx/chip.h
@@ -643,7 +643,8 @@ struct mv88e6xxx_ops {
/* Phylink */
void (*phylink_get_caps)(struct mv88e6xxx_chip *chip, int port,
- struct phylink_config *config);
+ struct phylink_config *config,
+ phy_interface_t *default_interface);
/* Max Frame Size */
int (*set_max_frame_size)(struct mv88e6xxx_chip *chip, int mtu);
--
2.30.2
More information about the linux-arm-kernel
mailing list