[PATCH] dt-bindings: mfd: stm32-timers: Move fixed string node names under 'properties'

[Fabrice Gasnier]

On 7/6/22 23:19, Rob Herring wrote:
> Fixed string node names should be under 'properties' rather than
> 'patternProperties'. Additionally, without beginning and end of line
> anchors, any prefix or suffix is allowed on the specified node name.
> 
> Move the stm32 timers 'counter' and 'timer' nodes to the 'properties'
> section.
> 
> Signed-off-by: Rob Herring <robh at kernel.org>

Hi Rob,

You can add my:
Reviewed-by: Fabrice Gasnier <fabrice.gasnier at foss.st.com>

Thanks and Best Regards,
Fabrice

> ---
>  .../bindings/mfd/st,stm32-lptimer.yaml        | 28 +++++++++----------
>  .../bindings/mfd/st,stm32-timers.yaml         | 20 ++++++-------
>  2 files changed, 24 insertions(+), 24 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml b/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml
> index ec7f0190f46e..a58f08aa430d 100644
> --- a/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml
> +++ b/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml
> @@ -58,43 +58,43 @@ properties:
>        - "#pwm-cells"
>        - compatible
>  
> -patternProperties:
> -  "^trigger@[0-9]+$":
> +  counter:
>      type: object
>  
>      properties:
>        compatible:
> -        const: st,stm32-lptimer-trigger
> -
> -      reg:
> -        description: Identify trigger hardware block.
> -        items:
> -          minimum: 0
> -          maximum: 2
> +        const: st,stm32-lptimer-counter
>  
>      required:
>        - compatible
> -      - reg
>  
> -  counter:
> +  timer:
>      type: object
>  
>      properties:
>        compatible:
> -        const: st,stm32-lptimer-counter
> +        const: st,stm32-lptimer-timer
>  
>      required:
>        - compatible
>  
> -  timer:
> +patternProperties:
> +  "^trigger@[0-9]+$":
>      type: object
>  
>      properties:
>        compatible:
> -        const: st,stm32-lptimer-timer
> +        const: st,stm32-lptimer-trigger
> +
> +      reg:
> +        description: Identify trigger hardware block.
> +        items:
> +          minimum: 0
> +          maximum: 2
>  
>      required:
>        - compatible
> +      - reg
>  
>  required:
>    - "#address-cells"
> diff --git a/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml b/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml
> index 10b330d42901..1bd663f886dc 100644
> --- a/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml
> +++ b/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml
> @@ -87,6 +87,16 @@ properties:
>        - "#pwm-cells"
>        - compatible
>  
> +  counter:
> +    type: object
> +
> +    properties:
> +      compatible:
> +        const: st,stm32-timer-counter
> +
> +    required:
> +      - compatible
> +
>  patternProperties:
>    "^timer@[0-9]+$":
>      type: object
> @@ -107,16 +117,6 @@ patternProperties:
>        - compatible
>        - reg
>  
> -  counter:
> -    type: object
> -
> -    properties:
> -      compatible:
> -        const: st,stm32-timer-counter
> -
> -    required:
> -      - compatible
> -
>  required:
>    - compatible
>    - reg