[PATCH v14 10/17] PCI: imx6: Turn off regulator when system is in suspend mode

[Lucas Stach]

Am Freitag, dem 01.07.2022 um 11:25 +0800 schrieb Richard Zhu:
> The driver should undo any enables it did itself. The regulator disable
> shouldn't be basing decisions on regulator_is_enabled().
> 
> Move the regulator_disable to the suspend function, turn off regulator when
> the system is in suspend mode.
> 
> To keep the balance of the regulator usage counter, disable the regulator
> in shutdown.
> 
> Link: https://lore.kernel.org/r/1655189942-12678-6-git-send-email-hongxing.z
> hu at nxp.com
> Signed-off-by: Richard Zhu <hongxing.zhu at nxp.com>
> Signed-off-by: Bjorn Helgaas <bhelgaas at google.com>
> ---
>  drivers/pci/controller/dwc/pci-imx6.c | 19 +++++++------------
>  1 file changed, 7 insertions(+), 12 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
> index 2b42c37f1617..f72eb609769b 100644
> --- a/drivers/pci/controller/dwc/pci-imx6.c
> +++ b/drivers/pci/controller/dwc/pci-imx6.c
> @@ -670,8 +670,6 @@ static void imx6_pcie_clk_disable(struct imx6_pcie *imx6_pcie)
>  
>  static void imx6_pcie_assert_core_reset(struct imx6_pcie *imx6_pcie)
>  {
> -	struct device *dev = imx6_pcie->pci->dev;
> -
>  	switch (imx6_pcie->drvdata->variant) {
>  	case IMX7D:
>  	case IMX8MQ:
> @@ -702,14 +700,6 @@ static void imx6_pcie_assert_core_reset(struct imx6_pcie *imx6_pcie)
>  		break;
>  	}
>  
> -	if (imx6_pcie->vpcie && regulator_is_enabled(imx6_pcie->vpcie) > 0) {
> -		int ret = regulator_disable(imx6_pcie->vpcie);
> -
> -		if (ret)
> -			dev_err(dev, "failed to disable vpcie regulator: %d\n",
> -				ret);
> -	}
> -
>  	/* Some boards don't have PCIe reset GPIO. */
>  	if (gpio_is_valid(imx6_pcie->reset_gpio))
>  		gpio_set_value_cansleep(imx6_pcie->reset_gpio,
> @@ -722,7 +712,7 @@ static int imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
>  	struct device *dev = pci->dev;
>  	int ret;
>  
> -	if (imx6_pcie->vpcie && !regulator_is_enabled(imx6_pcie->vpcie)) {
> +	if (imx6_pcie->vpcie) {
>  		ret = regulator_enable(imx6_pcie->vpcie);
>  		if (ret) {
>  			dev_err(dev, "failed to enable vpcie regulator: %d\n",

The regulator really has nothing to do with the core reset. Please move
this regulator enable into imx6_pcie_host_init().

> @@ -795,7 +785,7 @@ static int imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
>  	return 0;
>  
>  err_clks:
> -	if (imx6_pcie->vpcie && regulator_is_enabled(imx6_pcie->vpcie) > 0) {
> +	if (imx6_pcie->vpcie) {
>  		ret = regulator_disable(imx6_pcie->vpcie);
>  		if (ret)
>  			dev_err(dev, "failed to disable vpcie regulator: %d\n",
> @@ -1022,6 +1012,9 @@ static int imx6_pcie_suspend_noirq(struct device *dev)
>  		break;
>  	}
>  
> +	if (imx6_pcie->vpcie)
> +		regulator_disable(imx6_pcie->vpcie);
> +
>  	return 0;
>  }
>  
> @@ -1268,6 +1261,8 @@ static void imx6_pcie_shutdown(struct platform_device *pdev)
>  
>  	/* bring down link, so bootloader gets clean state in case of reboot */
>  	imx6_pcie_assert_core_reset(imx6_pcie);
> +	if (imx6_pcie->vpcie)
> +		regulator_disable(imx6_pcie->vpcie);

This looks like a separate change, not mentioned in the commit message.
I'm not sure if we should do this. Shutdown is supposed to just stop
the device, which is already achieved by
imx6_pcie_assert_core_reset(). 

If we would want to do a full cleanup here we would also need to
disable clocks and get the reset GPIO into asserted state. I don't
think we want to do all of this here.

Regards,
Lucas
>  }
>  
>  static const struct imx6_pcie_drvdata drvdata[] = {