[PATCH 4/6] arm64: dts: imx8mm-kontron: Use upper case PMIC regulator names

[Frieder Schrempf]

Am 13.07.22 um 09:52 schrieb Heiko Thiery:
> Hi Frieder,
> 
> Am Mi., 13. Juli 2022 um 09:41 Uhr schrieb Frieder Schrempf <frieder at fris.de>:
>>
>> From: Frieder Schrempf <frieder.schrempf at kontron.de>
>>
>> Use upper case PMIC regulator names to comply with the bindings.
>>
>> Signed-off-by: Frieder Schrempf <frieder.schrempf at kontron.de>
>> ---
>>  .../freescale/imx8mm-kontron-n801x-som.dtsi   | 22 +++++++++----------
>>  1 file changed, 11 insertions(+), 11 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi
>> index 2d0661cce89b..2e3d51bbf92e 100644
>> --- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi
>> +++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi
>> @@ -85,7 +85,7 @@ pca9450: pmic at 25 {
>>
>>                 regulators {
>>                         reg_vdd_soc: BUCK1 {
>> -                               regulator-name = "buck1";
>> +                               regulator-name = "BUCK1";
> 
> Wouldn't it be better to use the real signal or voltage rail names
> used in the schematics?

Sounds like a good idea, thanks! I will try to include in the next
version of this patchset.