[PATCH v2 7/7] iommu/exynos: Enable default VM instance on SysMMU v7

Sam Protsenko semen.protsenko at linaro.org
Sun Jul 10 16:06:03 PDT 2022


In order to enable SysMMU v7 with VM register layout, at least the
default VM instance (n=0) must be enabled, in addition to enabling the
SysMMU itself. To do so, add corresponding write to MMU_CTRL_VM[0]
register, before writing to MMU_CTRL register.

Signed-off-by: Sam Protsenko <semen.protsenko at linaro.org>
---
Changes in v2:
  - Extracted VM enabling code to the separate function
  - Used new SysMMU read/write functions to access the registers

 drivers/iommu/exynos-iommu.c | 24 ++++++++++++++++++++----
 1 file changed, 20 insertions(+), 4 deletions(-)

diff --git a/drivers/iommu/exynos-iommu.c b/drivers/iommu/exynos-iommu.c
index 64bf3331064f..2b333e137f57 100644
--- a/drivers/iommu/exynos-iommu.c
+++ b/drivers/iommu/exynos-iommu.c
@@ -135,6 +135,8 @@ static u32 lv2ent_offset(sysmmu_iova_t iova)
 #define CFG_SYSSEL	(1 << 22) /* System MMU 3.2 only */
 #define CFG_FLPDCACHE	(1 << 20) /* System MMU 3.2+ only */
 
+#define CTRL_VM_ENABLE			BIT(0)
+#define CTRL_VM_FAULT_MODE_STALL	BIT(3)
 #define CAPA0_CAPA1_EXIST		BIT(11)
 #define CAPA1_VCR_ENABLED		BIT(14)
 
@@ -183,6 +185,7 @@ enum {
 	IDX_FLUSH_END,
 	IDX_INT_STATUS,
 	IDX_INT_CLEAR,
+	IDX_CTRL_VM,
 	MAX_REG_IDX
 };
 
@@ -196,22 +199,22 @@ static const unsigned int sysmmu_regs[MAX_REG_SET][MAX_REG_IDX] = {
 	/* SysMMU v1..v3 */
 	{
 		0x00, 0x04, 0x08, 0x14, 0x0c, 0x10, 0x1, 0x1, 0x1,
-		0x18, 0x1c,
+		0x18, 0x1c, 0x1,
 	},
 	/* SysMMU v5 */
 	{
 		0x00, 0x04, 0x08, 0x0c, 0x10, 0x14, 0x18, 0x20, 0x24,
-		0x60, 0x64,
+		0x60, 0x64, 0x1,
 	},
 	/* SysMMU v7: Default register set (non-VM) */
 	{
 		0x00, 0x04, 0x08, 0x0c, 0x10, 0x14, 0x18, 0x20, 0x24,
-		0x60, 0x64,
+		0x60, 0x64, 0x1,
 	},
 	/* SysMMU v7: VM capable register set */
 	{
 		0x00, 0x04, 0x08, 0x800c, 0x8010, 0x8014, 0x8018, 0x8020,
-		0x8024, 0x60, 0x64,
+		0x8024, 0x60, 0x64, 0x8000,
 	},
 };
 
@@ -567,6 +570,18 @@ static void __sysmmu_init_config(struct sysmmu_drvdata *data)
 	sysmmu_write(data, IDX_CFG, cfg);
 }
 
+static void __sysmmu_enable_vid(struct sysmmu_drvdata *data)
+{
+	u32 ctrl;
+
+	if (MMU_MAJ_VER(data->version) < 7 || !data->has_vcr)
+		return;
+
+	ctrl = sysmmu_read(data, IDX_CTRL_VM);
+	ctrl |= CTRL_VM_ENABLE | CTRL_VM_FAULT_MODE_STALL;
+	sysmmu_write(data, IDX_CTRL_VM, ctrl);
+}
+
 static void __sysmmu_enable(struct sysmmu_drvdata *data)
 {
 	unsigned long flags;
@@ -577,6 +592,7 @@ static void __sysmmu_enable(struct sysmmu_drvdata *data)
 	sysmmu_write(data, IDX_CTRL, CTRL_BLOCK);
 	__sysmmu_init_config(data);
 	__sysmmu_set_ptbase(data, data->pgtable);
+	__sysmmu_enable_vid(data);
 	sysmmu_write(data, IDX_CTRL, CTRL_ENABLE);
 	data->active = true;
 	spin_unlock_irqrestore(&data->lock, flags);
-- 
2.30.2




More information about the linux-arm-kernel mailing list