[PATCH v4 8/8] serial: 8250: lpc18xx: Remove redundant sanity check for RS485 flags

[Lino Sanfilippo]

From: Lino Sanfilippo <l.sanfilippo at kunbus.com>

Before the drivers rs485_config() function is called the serial core
already ensures that only one of both options RTS on send or RTS after send
is set. So remove the concerning sanity check in the driver function to
avoid redundancy.

Signed-off-by: Lino Sanfilippo <l.sanfilippo at kunbus.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen at linux.intel.com>
---
 drivers/tty/serial/8250/8250_lpc18xx.c | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_lpc18xx.c b/drivers/tty/serial/8250/8250_lpc18xx.c
index d6ca0d47e9d5..6dc85aaba5d0 100644
--- a/drivers/tty/serial/8250/8250_lpc18xx.c
+++ b/drivers/tty/serial/8250/8250_lpc18xx.c
@@ -44,12 +44,8 @@ static int lpc18xx_rs485_config(struct uart_port *port, struct ktermios *termios
 		rs485_ctrl_reg |= LPC18XX_UART_RS485CTRL_NMMEN |
 				  LPC18XX_UART_RS485CTRL_DCTRL;
 
-		if (rs485->flags & SER_RS485_RTS_ON_SEND) {
+		if (rs485->flags & SER_RS485_RTS_ON_SEND)
 			rs485_ctrl_reg |= LPC18XX_UART_RS485CTRL_OINV;
-			rs485->flags &= ~SER_RS485_RTS_AFTER_SEND;
-		} else {
-			rs485->flags |= SER_RS485_RTS_AFTER_SEND;
-		}
 	}
 
 	if (rs485->delay_rts_after_send) {
-- 
2.25.1