[PATCH] ARM: dts: ixp4xx: Fix up the Netgear WG302 device tree

[Finn Thain]

On Fri, 8 Jul 2022, Linus Walleij wrote:

> On Fri, Jul 8, 2022 at 5:16 AM Finn Thain <fthain at linux-m68k.org> wrote:
> 
> > Does anyone still have the configs for that test? Here's what I see when I
> > build and boot ixp4xx_defconfig.
> >
> >     RedBoot> load -r -b 0x01600000 zImage
> >     Using default protocol (TFTP)
> >     Raw file loaded 0x01600000-0x018a4087, assumed entry at 0x01600000
> >     RedBoot> exec 0x01600000
> >     Using base address 0x01600000 and length 0x002a4088
> >
> >     Error: invalid dtb and unrecognized/unsupported machine ID
> >       r1=0x000000f5, r2=0x00000000
> >     Available machine support:
> >
> >     ID (hex)        NAME
> >     ffffffff        Generic DT based system
> >     ffffffff        IXP4xx (Device Tree)
> >
> >     Please check your kernel config and/or bootloader.
> 
> Usually this is because the DTB is corrupt.
> 
> > It would be great to have a working mainline build because without it this
> > router is just more e-waste. Any help would be appreciated.
> 
> I just test-booted it using v5.19-rc5. I can't mount root but
> otherwise it works.
> All info here:
> https://dflund.se/~triad/krad/netgear-wg302/
> 

That web page was very helpful. Thanks!