[PATCH v2 0/3] TQMa8MPxL + MBa8MPxL support

[Alexander Stein]

Ping,

I would like to get patch 1 & 2 into v5.20.

Regards,
Alexander

Am Mittwoch, 22. Juni 2022, 13:49:46 CEST schrieb Alexander Stein:
> Hello,
> 
> this patch set adds support for TQMa8MPxL on mainboard MBa8MPxL. This
> already includes some pinctrl and/or peripheral configurations which are
> not yet in use, e.g. PWM for PWM fan, backlight for LVDS panel, etc.
> Also note. this only supports MBa8MPxL Rev.2xx, Revision 1xx is
> not supported!
> 
> Changes in v2:
> * Added a-b in patch1
> * Changed LED label to function + color
> * Renamed some nodes
> * Added more pwm-backlight properties
> * Added comment about missing display compatible
> * Added display power-supply regulator
> * Fixed pinctl settings for HDMI mux
> * Added patch3 as WIP to show the LVDS overlay
> 
> Best regards,
> Alexander
> 
> Alexander Stein (2):
>   arm64: dts: freescale: add initial device tree for TQMa8MPQL with
>     i.MX8MP
>   [DNI/WIP] arm64: dts: freescale: Add LVDS overlay for TQMa8MPxL
> 
> Markus Niebel (1):
>   dt-bindings: arm: add TQMa8MPxL board
> 
>  .../devicetree/bindings/arm/fsl.yaml          |  12 +
>  arch/arm64/boot/dts/freescale/Makefile        |   3 +
>  .../imx8mp-tqma8mpql-mba8mpxl-lvds.dts        |  44 ++
>  .../freescale/imx8mp-tqma8mpql-mba8mpxl.dts   | 708 ++++++++++++++++++
>  .../boot/dts/freescale/imx8mp-tqma8mpql.dtsi  | 284 +++++++
>  5 files changed, 1051 insertions(+)
>  create mode 100644
> arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl-lvds.dts create
> mode 100644 arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
> create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi