[RESEND PATCH v3 1/2] Input: mt6779-keypad - match hardware matrix organization

[Mattijs Korpershoek]

The MediaTek keypad has a set of bits representing keys,
from KEY0 to KEY77, arranged in 5 chunks of 15 bits split into 5 32-bit
registers.

In our implementation, we simply decided to use register number as row
and offset in the register as column when encoding our "matrix".

Because of this, we can have a 5x32 matrix which does not match the
hardware at all, which is confusing.

Change the row/column calculation to match the hardware.

Fixes: f28af984e771 ("Input: mt6779-keypad - add MediaTek keypad driver")
Co-developed-by: Fabien Parent <fparent at baylibre.com>
Signed-off-by: Fabien Parent <fparent at baylibre.com>
Signed-off-by: Mattijs Korpershoek <mkorpershoek at baylibre.com>
---
 drivers/input/keyboard/mt6779-keypad.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/input/keyboard/mt6779-keypad.c b/drivers/input/keyboard/mt6779-keypad.c
index 2e7c9187c10f..bd86cb95bde3 100644
--- a/drivers/input/keyboard/mt6779-keypad.c
+++ b/drivers/input/keyboard/mt6779-keypad.c
@@ -42,7 +42,7 @@ static irqreturn_t mt6779_keypad_irq_handler(int irq, void *dev_id)
 	const unsigned short *keycode = keypad->input_dev->keycode;
 	DECLARE_BITMAP(new_state, MTK_KPD_NUM_BITS);
 	DECLARE_BITMAP(change, MTK_KPD_NUM_BITS);
-	unsigned int bit_nr;
+	unsigned int bit_nr, key;
 	unsigned int row, col;
 	unsigned int scancode;
 	unsigned int row_shift = get_count_order(keypad->n_cols);
@@ -61,8 +61,10 @@ static irqreturn_t mt6779_keypad_irq_handler(int irq, void *dev_id)
 		if (bit_nr % 32 >= 16)
 			continue;
 
-		row = bit_nr / 32;
-		col = bit_nr % 32;
+		key = bit_nr / 32 * 16 + bit_nr % 32;
+		row = key / 9;
+		col = key % 9;
+
 		scancode = MATRIX_SCAN_CODE(row, col, row_shift);
 		/* 1: not pressed, 0: pressed */
 		pressed = !test_bit(bit_nr, new_state);
-- 
2.34.1