[PATCH] dt-bindings: phy: samsung,ufs-phy: match clock items

[Krzysztof Kozlowski]

On 07/07/2022 02:55, Chanho Park wrote:
> Below error is detected from dtbs_check. exynos7-ufs-phy is required
> symbol clocks otherwise only PLL ref clock is required.
> 
> clock-names: ['ref_clk'] is too short

Thank you for your patch. There is something to discuss/improve.

> 
> Reported-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
> Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
> Suggested-by: Alim Akhtar <alim.akhtar at samsung.com>
> Signed-off-by: Chanho Park <chanho61.park at samsung.com>
> ---
>  .../bindings/phy/samsung,ufs-phy.yaml         | 47 +++++++++++++++----
>  1 file changed, 37 insertions(+), 10 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/phy/samsung,ufs-phy.yaml b/Documentation/devicetree/bindings/phy/samsung,ufs-phy.yaml
> index 8da99461e817..3b04f31d9f21 100644
> --- a/Documentation/devicetree/bindings/phy/samsung,ufs-phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/samsung,ufs-phy.yaml
> @@ -27,18 +27,12 @@ properties:
>        - const: phy-pma
>  
>    clocks:
> -    items:
> -      - description: PLL reference clock
> -      - description: symbol clock for input symbol ( rx0-ch0 symbol clock)
> -      - description: symbol clock for input symbol ( rx1-ch1 symbol clock)
> -      - description: symbol clock for output symbol ( tx0 symbol clock)
> +    minItems: 1
> +    maxItems: 4
>  
>    clock-names:
> -    items:
> -      - const: ref_clk
> -      - const: rx1_symbol_clk
> -      - const: rx0_symbol_clk
> -      - const: tx0_symbol_clk
> +    minItems: 1
> +    maxItems: 4
>  
>    samsung,pmu-syscon:
>      $ref: '/schemas/types.yaml#/definitions/phandle-array'
> @@ -53,6 +47,39 @@ properties:
>        It can be phandle/offset pair. The second cell which can represent an
>        offset is optional.
>  
> +allOf:

The allOf block should go after "required" block.

> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: samsung,exynos7-ufs-phy
> +
> +    then:
> +      properties:
> +        clocks:
> +          items:
> +            - description: PLL reference clock
> +            - description: symbol clock for input symbol ( rx0-ch0 symbol clock)
> +            - description: symbol clock for input symbol ( rx1-ch1 symbol clock)
> +            - description: symbol clock for output symbol ( tx0 symbol clock)

While moving drop space after '('.

> +
> +        clock-names:
> +          items:
> +            - const: ref_clk
> +            - const: rx1_symbol_clk
> +            - const: rx0_symbol_clk
> +            - const: tx0_symbol_clk
> +
> +    else:
> +      properties:
> +        clocks:
> +          items:
> +            - description: PLL reference clock
> +
> +        clock-names:
> +          items:
> +            - const: ref_clk
> +
>  required:
>    - "#phy-cells"
>    - compatible


Best regards,
Krzysztof