[PATCH V4] arm64: dts: imx8mp: add NoC node

[Peng Fan (OSS)]

From: Peng Fan <peng.fan at nxp.com>

Add i.MX8MP NoC node to make the interconnect i.MX8MP driver could work.
Currently dynamic frequency scaling of the i.MX8MP NoC has not been
supported, only NoC initial settings are configured by interconnect
driver.

Signed-off-by: Peng Fan <peng.fan at nxp.com>
---

V4:
 Georgi has merged the V3 driver and bindings patches. So only resend
 this patch. Per Georgi's comments:
  - Drop syscon from compatbile
  - Drop the header inclusion

 Seems I not see this patch in patchwork or mailist, maybe sent failed.
 So gave a resend of V4.

 V3:
  https://lore.kernel.org/linux-arm-kernel/20220703091132.1412063-1-peng.fan@oss.nxp.com/

 I not list the full change log, since this is only a minor patch

 arch/arm64/boot/dts/freescale/imx8mp.dtsi | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index eb2d516278eb..42ed8ee08548 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -1019,6 +1019,27 @@ eqos: ethernet at 30bf0000 {
 			};
 		};
 
+		noc: interconnect at 32700000 {
+			compatible = "fsl,imx8mp-noc", "fsl,imx8m-noc";
+			reg = <0x32700000 0x100000>;
+			clocks = <&clk IMX8MP_CLK_NOC>;
+			#interconnect-cells = <1>;
+
+			operating-points-v2 = <&noc_opp_table>;
+
+			noc_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-200M {
+					opp-hz = /bits/ 64 <200000000>;
+				};
+
+				opp-1000M {
+					opp-hz = /bits/ 64 <1000000000>;
+				};
+			};
+		};
+
 		aips4: bus at 32c00000 {
 			compatible = "fsl,aips-bus", "simple-bus";
 			reg = <0x32c00000 0x400000>;
-- 
2.25.1