[PATCH] i2c: brcmstb: Fixed adapter named with optional interrupts

[Florian Fainelli]

When the adapter is registered without interrupts, we would be showing
the following:

  # i2cdetect -l
  i2c-3   i2c             Broadcom STB :                          I2C adapter

which is visually disturbing, only add the separator if we do have an
interrupt.

Fixes: dd1aa2524bc5 ("i2c: brcmstb: Add Broadcom settop SoC i2c controller driver")
Signed-off-by: Florian Fainelli <f.fainelli at gmail.com>
---
 drivers/i2c/busses/i2c-brcmstb.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/i2c/busses/i2c-brcmstb.c b/drivers/i2c/busses/i2c-brcmstb.c
index b00f35c0b066..538a51299e04 100644
--- a/drivers/i2c/busses/i2c-brcmstb.c
+++ b/drivers/i2c/busses/i2c-brcmstb.c
@@ -684,9 +684,11 @@ static int brcmstb_i2c_probe(struct platform_device *pdev)
 	adap = &dev->adapter;
 	i2c_set_adapdata(adap, dev);
 	adap->owner = THIS_MODULE;
-	strlcpy(adap->name, "Broadcom STB : ", sizeof(adap->name));
-	if (int_name)
+	strlcpy(adap->name, "Broadcom STB", sizeof(adap->name));
+	if (int_name) {
+		strlcat(adap->name, ": ", sizeof(adap->name));
 		strlcat(adap->name, int_name, sizeof(adap->name));
+	}
 	adap->algo = &brcmstb_i2c_algo;
 	adap->dev.parent = &pdev->dev;
 	adap->dev.of_node = pdev->dev.of_node;
-- 
2.25.1