[PATCH V3 10/10] arm64: dts: imx8mp: add NoC node

[Peng Fan (OSS)]

From: Peng Fan <peng.fan at nxp.com>

Add i.MX8MP NoC node to make the interconnect i.MX8MP driver could work.
Currently dynamic frequency scaling of the i.MX8MP NoC has not been
supported, only NoC initial settings are configured by interconnect
driver.

Signed-off-by: Peng Fan <peng.fan at nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8mp.dtsi | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index eb2d516278eb..13a2ee77d3c6 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -4,6 +4,7 @@
  */
 
 #include <dt-bindings/clock/imx8mp-clock.h>
+#include <dt-bindings/interconnect/fsl,imx8mp.h>
 #include <dt-bindings/power/imx8mp-power.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
@@ -1019,6 +1020,27 @@ eqos: ethernet at 30bf0000 {
 			};
 		};
 
+		noc: interconnect at 32700000 {
+			compatible = "fsl,imx8mp-noc", "fsl,imx8m-noc", "syscon";
+			reg = <0x32700000 0x100000>;
+			clocks = <&clk IMX8MP_CLK_NOC>;
+			#interconnect-cells = <1>;
+
+			operating-points-v2 = <&noc_opp_table>;
+
+			noc_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-200M {
+					opp-hz = /bits/ 64 <200000000>;
+				};
+
+				opp-1000M {
+					opp-hz = /bits/ 64 <1000000000>;
+				};
+			};
+		};
+
 		aips4: bus at 32c00000 {
 			compatible = "fsl,aips-bus", "simple-bus";
 			reg = <0x32c00000 0x400000>;
-- 
2.25.1