[PATCH v2 1/4] ARM: dtsi: suniv: F1c100s add clock and reset macros

[Jesse Taube]

Include clock and reset macros and replace magic numbers.

Signed-off-by: Jesse Taube <Mr.Bossman075 at gmail.com>
---
 arch/arm/boot/dts/suniv-f1c100s.dtsi | 17 ++++++++++-------
 1 file changed, 10 insertions(+), 7 deletions(-)

diff --git a/arch/arm/boot/dts/suniv-f1c100s.dtsi b/arch/arm/boot/dts/suniv-f1c100s.dtsi
index 6100d3b75f61..953228cc8d52 100644
--- a/arch/arm/boot/dts/suniv-f1c100s.dtsi
+++ b/arch/arm/boot/dts/suniv-f1c100s.dtsi
@@ -4,6 +4,9 @@
  * Copyright 2018 Mesih Kilinc <mesihkilinc at gmail.com>
  */
 
+#include <dt-bindings/clock/suniv-ccu-f1c100s.h>
+#include <dt-bindings/reset/suniv-ccu-f1c100s.h>
+
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
@@ -82,7 +85,7 @@ pio: pinctrl at 1c20800 {
 			compatible = "allwinner,suniv-f1c100s-pinctrl";
 			reg = <0x01c20800 0x400>;
 			interrupts = <38>, <39>, <40>;
-			clocks = <&ccu 37>, <&osc24M>, <&osc32k>;
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>;
 			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			interrupt-controller;
@@ -114,8 +117,8 @@ uart0: serial at 1c25000 {
 			interrupts = <1>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&ccu 38>;
-			resets = <&ccu 24>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			resets = <&ccu RST_BUS_UART0>;
 			status = "disabled";
 		};
 
@@ -125,8 +128,8 @@ uart1: serial at 1c25400 {
 			interrupts = <2>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&ccu 39>;
-			resets = <&ccu 25>;
+			clocks = <&ccu CLK_BUS_UART1>;
+			resets = <&ccu RST_BUS_UART1>;
 			status = "disabled";
 		};
 
@@ -136,8 +139,8 @@ uart2: serial at 1c25800 {
 			interrupts = <3>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&ccu 40>;
-			resets = <&ccu 26>;
+			clocks = <&ccu CLK_BUS_UART2>;
+			resets = <&ccu RST_BUS_UART2>;
 			status = "disabled";
 		};
 	};
-- 
2.34.1