[BUG] pinctrl: reg-fixed-voltage usb0-vbus: error -EINVAL: can't get GPIO

Guenter Roeck linux at roeck-us.net
Fri Jan 28 09:20:03 PST 2022


On Tue, Jan 18, 2022 at 03:13:20PM +0100, Hans Verkuil wrote:
> On 1/18/22 13:50, Corentin Labbe wrote:
> > Hello
> > 
> > As reported on old googlegroup sunxi mainling list, on linux-next-20220118, USB storage fail to bring up on orangepiPC.
> > We can see some error logs in dmesg:
> > reg-fixed-voltage usb0-vbus: error -EINVAL: can't get GPIO
> > reg-fixed-voltage: probe of usb0-vbus failed with error -22
> > 
> > This is bisected to: 8df89a7cbc63c7598c00611ad17b67e8d5b4fad3 pinctrl-sunxi: don't call pinctrl_gpio_direction()
> > 
> > Reverting this commit lead to a working USB storage being setuped.
> 
> Hmm, I'll bet it's EPROBE_DEFER related.
> 

No. For me the problem is only seen if I try to boot from the second usb
interface with the orangepi-pc qemu emulation, but not when I try to boot
from the first usb interface. That alone makes it unlikely to be an
EPROBE_DEFER related problem.

Some debugging with your code in the tree:

[    7.076227] sun8i-h3-r-pinctrl 1f02c00.pinctrl: ########### sunxi_pmx_gpio_set_direction: offset=10, input=0
[    7.076567] sun8i-h3-r-pinctrl 1f02c00.pinctrl: ########### sunxi_pinctrl_gpio_direction_output: offset=10, value=1, ret=-22
[    7.076992] leds-gpio: probe of leds failed with error -22
[    7.081645] sun8i-h3-r-pinctrl 1f02c00.pinctrl: ########### sunxi_pmx_gpio_set_direction: offset=2, input=0
[    7.081887] sun8i-h3-r-pinctrl 1f02c00.pinctrl: ########### sunxi_pinctrl_gpio_direction_output: offset=2, value=0, ret=-22
[    7.082424] reg-fixed-voltage usb0-vbus: error -EINVAL: can't get GPIO
[    7.082793] reg-fixed-voltage: probe of usb0-vbus failed with error -22
[    7.129355] sun8i-h3-pinctrl 1c20800.pinctrl: ########### sunxi_pmx_gpio_set_direction: offset=166, input=1
[    7.129844] sun8i-h3-pinctrl 1c20800.pinctrl: ######### sunxi_pinctrl_gpio_direction_input: offset=166, ret=0
[    7.130788] sunxi-mmc 1c0f000.mmc: Got CD GPIO
[    7.169391] sun8i-h3-r-pinctrl 1f02c00.pinctrl: ########### sunxi_pmx_gpio_set_direction: offset=3, input=1
[    7.169663] sun8i-h3-r-pinctrl 1f02c00.pinctrl: ######### sunxi_pinctrl_gpio_direction_input: offset=3, ret=-22
[    7.170054] gpio-keys r_gpio_keys: failed to get gpio: -22
[    7.170262] gpio-keys: probe of r_gpio_keys failed with error -22

And after reverting it:

[    6.138097] sun8i-h3-r-pinctrl 1f02c00.pinctrl: ########### sunxi_pmx_gpio_set_direction: offset=362, input=0
[    6.138375] sun8i-h3-r-pinctrl 1f02c00.pinctrl: ########### sunxi_pinctrl_gpio_direction_output: offset=10, value=1, ret=0
[    6.140762] sun8i-h3-pinctrl 1c20800.pinctrl: ########### sunxi_pmx_gpio_set_direction: offset=15, input=0
[    6.140918] sun8i-h3-pinctrl 1c20800.pinctrl: ########### sunxi_pinctrl_gpio_direction_output: offset=15, value=0, ret=0
[    6.142808] sun8i-h3-pinctrl 1c20800.pinctrl: supply vcc-pf not found, using dummy regulator
[    6.148879] sun8i-h3-r-pinctrl 1f02c00.pinctrl: ########### sunxi_pmx_gpio_set_direction: offset=354, input=0
[    6.149086] sun8i-h3-r-pinctrl 1f02c00.pinctrl: ########### sunxi_pinctrl_gpio_direction_output: offset=2, value=0, ret=0
[    6.154485] sun8i-h3-pinctrl 1c20800.pinctrl: supply vcc-pg not found, using dummy regulator
[    6.155657] sun8i-h3-pinctrl 1c20800.pinctrl: ########### sunxi_pmx_gpio_set_direction: offset=204, input=1
[    6.155853] sun8i-h3-pinctrl 1c20800.pinctrl: ######### sunxi_pinctrl_gpio_direction_input: offset=204, ret=0
[    6.174411] ehci-platform 1c1b000.usb: EHCI Host Controller
[    6.174737] ehci-platform 1c1b000.usb: new USB bus registered, assigned bus number 3
[    6.188776] sun8i-h3-pinctrl 1c20800.pinctrl: ########### sunxi_pmx_gpio_set_direction: offset=166, input=1
[    6.189149] sun8i-h3-pinctrl 1c20800.pinctrl: ######### sunxi_pinctrl_gpio_direction_input: offset=166, ret=0
[    6.189720] sunxi-mmc 1c0f000.mmc: Got CD GPIO
...
[    6.674660] sun8i-h3-r-pinctrl 1f02c00.pinctrl: ########### sunxi_pmx_gpio_set_direction: offset=355, input=1
[    6.674796] sun8i-h3-r-pinctrl 1f02c00.pinctrl: ######### sunxi_pinctrl_gpio_direction_input: offset=3, ret=0

In other words, there is some offset translation missing with your patch,
causing -EINVAL returns.

Guenter



More information about the linux-arm-kernel mailing list