[PATCH 3/3] arm64: dts: rockchip: add Quartz64-A sdmmc1 node

[Peter Geis]

On Thu, Jan 27, 2022 at 5:15 AM Heiko Stübner <heiko at sntech.de> wrote:
>
> Am Donnerstag, 27. Januar 2022, 10:55:13 CET schrieb Peter Geis:
> > On Thu, Jan 27, 2022 at 1:18 AM Johan Jonker <jbx6244 at gmail.com> wrote:
> > >
> > >
> > >
> > > On 1/27/22 02:00, Peter Geis wrote:
> > > > The sdmmc1 node on Quartz64-A supports the optional wifi module from
> > > > Pine64.
> > > > Add the sdmmc1 node and requisite sdio_pwrseq to enable wifi support on
> > > > the Quartz64-A.
> > > >
> > > > Signed-off-by: Peter Geis <pgwipeout at gmail.com>
> > > > ---
> > > >  .../boot/dts/rockchip/rk3566-quartz64-a.dts   | 45 +++++++++++++++++++
> > > >  1 file changed, 45 insertions(+)
> > > >
> > > > diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
> > > > index 33c2c18caaa9..1d73ac6557c5 100644
> > > > --- a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
> > > > +++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
> > > > @@ -91,6 +91,18 @@ simple-audio-card,codec {
> > > >               };
> > > >       };
> > > >
> > > > +     sdio_pwrseq: sdio-pwrseq {
> > >
> > > > +             status = "okay";
> > >
> > > When a node is not previously disabled, then there's no need for "okay".
> >
> > Thanks, this is here in case an end user wants to easily hack the
> > board to use this for other purposes.
>
> but please drop it here as well.
>
> A user "hacking" a devicetree should be able to also just _add_
> a status "disabled" :-) .

Understood, will do.
Thanks!

>
>