Patch "pinctrl: bcm2835: Match BCM7211 compatible string" has been added to the 5.4-stable tree
gregkh at linuxfoundation.org
gregkh at linuxfoundation.org
Thu Jan 27 08:01:50 PST 2022
This is a note to let you know that I've just added the patch titled
pinctrl: bcm2835: Match BCM7211 compatible string
to the 5.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
pinctrl-bcm2835-match-bcm7211-compatible-string.patch
and it can be found in the queue-5.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable at vger.kernel.org> know about it.
>From foo at baz Thu Jan 27 04:40:37 PM CET 2022
From: Florian Fainelli <f.fainelli at gmail.com>
Date: Tue, 25 Jan 2022 11:42:19 -0800
Subject: pinctrl: bcm2835: Match BCM7211 compatible string
To: stable at vger.kernel.org
Cc: Florian Fainelli <f.fainelli at gmail.com>, Linus Walleij <linus.walleij at linaro.org>, Rob Herring <robh+dt at kernel.org>, Mark Rutland <mark.rutland at arm.com>, Ray Jui <rjui at broadcom.com>, Scott Branden <sbranden at broadcom.com>, bcm-kernel-feedback-list at broadcom.com (maintainer:BROADCOM BCM281XX/BCM11XXX/BCM216XX ARM ARCHITE...), Eric Anholt <eric at anholt.net>, Stefan Wahren <wahrenst at gmx.net>, Nicolas Saenz Julienne <nsaenz at kernel.org>, Phil Elwell <phil at raspberrypi.com>, devicetree at vger.kernel.org (open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS), linux-kernel at vger.kernel.org (open list), linux-gpio at vger.kernel.org (open list:PIN CONTROL SUBSYSTEM), linux-rpi-kernel at lists.infradead.org (moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE), linux-arm-kernel at lists.infradead.org (moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE)
Message-ID: <20220125194222.12783-5-f.fainelli at gmail.com>
From: Florian Fainelli <f.fainelli at gmail.com>
commit 562c856f96d22ef1204b0a314bc52e85617199b4 upstream
The BCM7211 SoC uses the same pinconf_ops as the ones defined for the
BCM2711 SoC, match the compatible string and use the correct set of
options.
Signed-off-by: Florian Fainelli <f.fainelli at gmail.com>
Link: https://lore.kernel.org/r/20200531001101.24945-4-f.fainelli@gmail.com
Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
Signed-off-by: Florian Fainelli <f.fainelli at gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh at linuxfoundation.org>
---
drivers/pinctrl/bcm/pinctrl-bcm2835.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c
+++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c
@@ -1134,6 +1134,10 @@ static const struct of_device_id bcm2835
.compatible = "brcm,bcm2711-gpio",
.data = &bcm2711_plat_data,
},
+ {
+ .compatible = "brcm,bcm7211-gpio",
+ .data = &bcm2711_plat_data,
+ },
{}
};
Patches currently in stable-queue which might be from f.fainelli at gmail.com are
queue-5.4/pinctrl-bcm2835-drop-unused-define.patch
queue-5.4/arm-dts-gpio-ranges-property-is-now-required.patch
queue-5.4/pinctrl-bcm2835-add-support-for-wake-up-interrupts.patch
queue-5.4/pinctrl-bcm2835-change-init-order-for-gpio-hogs.patch
queue-5.4/pinctrl-bcm2835-refactor-platform-data.patch
queue-5.4/pinctrl-bcm2835-match-bcm7211-compatible-string.patch
queue-5.4/pinctrl-bcm2835-add-support-for-all-gpios-on-bcm2711.patch
More information about the linux-arm-kernel
mailing list