[RESEND v4 04/10] arm64: dts: freescale: Add adma subsystem dtsi for imx8dxl

[Shawn Guo]

On Thu, Dec 16, 2021 at 08:48:08PM +0200, Abel Vesa wrote:
> Override the I2Cs, LPUARTs, audio_ipg_clk and dma_ipg_clk with
> the i.MX8DXL specific properties.
> 
> Signed-off-by: Clark Wang <xiaoning.wang at nxp.com>
> Signed-off-by: Jacky Bai <ping.bai at nxp.com>
> Signed-off-by: Abel Vesa <abel.vesa at nxp.com>
> ---
>  .../boot/dts/freescale/imx8dxl-ss-adma.dtsi   | 53 +++++++++++++++++++
>  1 file changed, 53 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi
> new file mode 100644
> index 000000000000..eccc31ee8f1b
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi
> @@ -0,0 +1,53 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright 2019-2021 NXP
> + */
> +
> +&audio_ipg_clk {
> +	clock-frequency = <160000000>;
> +};
> +
> +&dma_ipg_clk {
> +	clock-frequency = <160000000>;
> +};
> +
> +&i2c0 {
> +	compatible = "fsl,imx8dxl-lpi2c", "fsl,imx7ulp-lpi2c";
> +	interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
> +};
> +
> +&i2c1 {
> +	compatible = "fsl,imx8dxl-lpi2c", "fsl,imx7ulp-lpi2c";
> +	interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
> +};
> +
> +&i2c2 {
> +	compatible = "fsl,imx8dxl-lpi2c", "fsl,imx7ulp-lpi2c";
> +	interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
> +};
> +
> +&i2c3 {
> +	compatible = "fsl,imx8dxl-lpi2c", "fsl,imx7ulp-lpi2c";
> +	interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
> +};
> +
> +&lpuart0 {
> +	compatible = "fsl,imx8dxl-lpuart", "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
> +	interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
> +};
> +
> +&lpuart1 {
> +	compatible = "fsl,imx8dxl-lpuart", "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
> +	interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
> +};
> +
> +&lpuart2 {
> +	compatible = "fsl,imx8dxl-lpuart", "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
> +	interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>;
> +};
> +
> +&lpuart3 {
> +	compatible = "fsl,imx8dxl-lpuart", "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
> +	interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
> +};
> +

Drop the newline.

Shawn